Page 1 of 2

my 1000

Posted: Tue Jun 08, 2010 3:34 pm
by zenitb
Just got it today
Image
Image
Image
Image
Image

Re: my 1000

Posted: Tue Jun 08, 2010 3:37 pm
by scotty
Congrats nice flame too! :shock: 8)

Re: my 1000

Posted: Tue Jun 08, 2010 3:40 pm
by zenitb
Thanks! If anyone can give me some idea where the serial number is, it would be appreciated.

Re: my 1000

Posted: Tue Jun 08, 2010 3:57 pm
by kiramdear
zenitb wrote:Thanks! If anyone can give me some idea where the serial number is, it would be appreciated.
If it's not stamped on the tailpiece, look on the back down by the strap button. Sometimes it is stamped in the wood there.

Re: my 1000

Posted: Tue Jun 08, 2010 4:46 pm
by zenitb
kiramdear wrote:
zenitb wrote:Thanks! If anyone can give me some idea where the serial number is, it would be appreciated.
If it's not stamped on the tailpiece, look on the back down by the strap button. Sometimes it is stamped in the wood there.
I have inspected the body and headstock then the bridge (which is chrome and a little corroded) it is a combo bridge/tailpiece; I don't see anything stamped there either. Still lookin'

Re: my 1000

Posted: Tue Jun 08, 2010 5:36 pm
by opticnerve
Very nice! Congrats!

Can you post a pic of the tailpiece?

Re: my 1000

Posted: Tue Jun 08, 2010 7:28 pm
by zenitb
opticnerve wrote:Very nice! Congrats!

Can you post a pic of the tailpiece?
Here ya go......

Image

Re: my 1000

Posted: Wed Jun 09, 2010 3:36 am
by doctorwho
Well, it definitely is an early one, based on the square neck heel, single-line Klusons, and metal truss rod cover. Sure is pretty! I have a Ryder 1000 from 1966, so I know how nice they are!

Another thing to help establish an approximate date is to look at the date codes on the control potentiometers.

Re: my 1000

Posted: Wed Jun 09, 2010 6:04 am
by longboard_ric
Hi Michael, Congrats, that is an interesting guitar. :D

Re: my 1000

Posted: Wed Jun 09, 2010 8:02 am
by opticnerve
Thanks for the pic of the tail piece Mike!

Odd...no serial number on that tail.

Re: my 1000

Posted: Wed Jun 09, 2010 8:07 am
by ken_j
I see a 501 on the right side of the tail piece but cannot make out anything on the left. It is most likely there with the corrosion.
tailpiece.jpg
tailpiece.jpg (1.44 KiB) Viewed 1684 times
contrast adjusted
contrast adjusted
tailpiece 2.jpg (1.64 KiB) Viewed 1683 times

Re: my 1000

Posted: Wed Jun 09, 2010 8:28 am
by jdogric12
I had a 59 950 with a similar problem. Simmons licked his finger and rubbed some of the crud off and we found the serial, V9 something, which looked like they used an upside down "A" stamper.

Re: my 1000

Posted: Wed Jun 09, 2010 10:44 am
by zenitb
jdogric12 wrote:I had a 59 950 with a similar problem. Simmons licked his finger and rubbed some of the crud off and we found the serial, V9 something, which looked like they used an upside down "A" stamper.
Thanks for the suggestions.
I'll look tonight (I'm already at work)

Re: my 1000

Posted: Wed Jun 09, 2010 2:11 pm
by zenitb
longboard_ric wrote:Hi Michael, Congrats, that is an interesting guitar. :D
Thanks, I have seen the pics that you have posted, you have some interesting stuff yourself!

Re: my 1000

Posted: Wed Jun 09, 2010 3:23 pm
by 8mileshigher
Congrats on your acquisition, Michael. :D 8)
It looks like it is in very good condition.