Page 1 of 1
how to tell pot type?
Posted: Sat Jul 03, 2010 1:06 pm
by jdogric12
Hi gang, how do I know what my pots are? They are stamped 07341 0503. The big orange things are marked SBE715P600V 473J 0443. (I'm putting the original pu's back in the 4002 btw) thanks, j
Re: how to tell pot type?
Posted: Sat Jul 03, 2010 1:36 pm
by teb
How to tell pot type?
Easy, call in an expert......
Hey man, open the door, it's me.....
Re: how to tell pot type?
Posted: Sat Jul 03, 2010 2:25 pm
by jdogric12
Ha ha ha... oops I meant to post this in technical, stupid phone browser... and user error! (Admin relocation welcomed)
Re: how to tell pot type?
Posted: Sat Jul 03, 2010 2:40 pm
by scotty
Re: how to tell pot type?
Posted: Sun Jul 04, 2010 1:56 am
by kiramdear
Dave's not here!
Re: how to tell pot type?
Posted: Mon Jul 05, 2010 9:10 am
by grazioso
if you take them out of circuit you can measure them with multimeter ...but
07432 are 250k
07431 are 500k
if you look @ schematics on ric corp web it looks like both are there...
Re: how to tell pot type?
Posted: Mon Jul 05, 2010 9:31 am
by cjj
What are these post from? Are you sure those are all the numbers on the pots? Is there a possibility some numbers are covered by solder? The number 07341 doesn't really fit most source codes I've seen, at least for older stuff. The codes usually have a 3 digit manufacturer code followed be a 3 digit (40s & 50s) or 4 digit date code. The 0503 looks like it might be the pot value, which would be 50k for 0503. Some of the newer pots have different codes these days.
The "big orange things" are capacitors. A "715P600V 473J" is a 0.047uF +/-5% polypropylene capacitor rated for 600V, commonly known as an "Orange Drop" cap.
Pictures might help too...
Re: how to tell pot type?
Posted: Mon Jul 05, 2010 11:02 am
by ken_j
Why not just measure them when they are out of the circuit?
Re: how to tell pot type?
Posted: Tue Jul 06, 2010 8:54 am
by jdogric12
Dang. I now have TWO pairs of pickups with a wire missing. We accidentally popped out the red wire on the good treble pickup.
Re: how to tell pot type?
Posted: Tue Jul 06, 2010 9:20 am
by grazioso
it can be fixed, -a ? - so no reason for
....just do not overheat any terminal on the pickup...
Re: how to tell pot type?
Posted: Wed Jul 07, 2010 8:35 am
by jdogric12
I'm going to try to get in touch with Fralin today.
Re: how to tell pot type?
Posted: Thu Jul 08, 2010 9:35 am
by grazioso
jdogric12 wrote:I'm going to try to get in touch with Fralin today.
try curtisnovak.com i like the guy better
Re: how to tell pot type?
Posted: Thu Jul 08, 2010 11:47 am
by jdogric12
D'oh! Already arranged to send to LF tomorrow. Thanks anyways though Dusan!
Re: how to tell pot type?
Posted: Thu Jul 08, 2010 1:12 pm
by billydlight
Smell it...
