Page 1 of 1

Matching 2X12,

Posted: Sat Sep 11, 2010 8:36 pm
by fidopunk
Just as a friendly FYI as I know matching Rickenbacker 2X12's are impossible to find: I too have been on the hunt for a 2X12 that would match my new-to-me B-22 head (viewtopic.php?f=10&t=396521).

After some searching and some requests for tolex and grill cloth, I found that Lopo Line (http://www.lopoline.com/home.html) made a real close match. Their silver tolex/silver grill cloth was almost spot on and the width was perfect. I ordered an extra piece of grill cloth so I could re-do the amplifier head for an exact match. I added the new cloth over the original so if in the future I ever wanted to go back to stock it all I would have to do is pull some staples.
Not bad for my first recover:
Image
The customer service people were super, super nice and tolerated my dumb questions politely.
So this is just my unsolicited advert for you guys/gals that are without a cabinet.
Enjoy
Eric.

Re: Matching 2X12,

Posted: Sun Sep 12, 2010 1:42 am
by doctorwho
That's a nice match! :)

Re: Matching 2X12,

Posted: Sun Sep 12, 2010 1:54 am
by paologregorio
Have you thought of having a replica box for the head built and covering that with the matching LOPO cloth/tolex? It would be a bit more expensive, but the original condition of your Rick hea'd's cabinet would be preserved entirely.

If you're local to the So Cal area, I can refer you to a custom amp cabinet builder who would do a perfect job.

Re: Matching 2X12,

Posted: Sun Sep 12, 2010 8:12 am
by fidopunk
Paul,
That's a good suggestion; I hadn't thought about building a new box-- I did consider cutting up a board to upholster just for the grill cloth in case the original composite board disintegrated-- but it wasn't a problem. I don't think a new box is really necessary because after I cleaned up the head with some dish detergent, it removed a ton of cigarette smoke and now the tolex is the same color. It's the same grain, too, so they're absolutely identical.
As far as the concern about damaging it-- I think it's built so well that it shouldn't be an issue. That and I'm not really worried about its condition because the chrome face/white paint labels are corroded and worn off, respectively. The photos make it look like it's a lot better shape than it actually is.

Re: Matching 2X12,

Posted: Sun Sep 12, 2010 6:40 pm
by Malchik
Are you planning on gigging with it?

Re: Matching 2X12,

Posted: Mon Sep 13, 2010 9:16 am
by fidopunk
Yep, I was thinking about it-- seems like I've worked the bugs out and she seems pretty reliable. I'll still bring a backup.