Page 1 of 1
4001/4003 pickup cover question
Posted: Mon Sep 13, 2010 2:17 am
by steversaurus
Picked up a pickup cover on the cheap as a backup in case I lost my original. After comparing with my mid 70s 4001, I realize that they are quite different. One seems a little taller and thicker. When/How many times did they change the them?
Re: 4001/4003 pickup cover question
Posted: Mon Sep 13, 2010 3:43 am
by weemac
As far as the plastic covers go the one change was in about 75 where they went from the low profile cover to the modern cover.
I like the low profile one...
Eden.
Re: 4001/4003 pickup cover question
Posted: Mon Sep 13, 2010 2:04 pm
by steversaurus
Thanks. I didn't know they changed it up that early. I always thought it was during the switch to the 4003
Re: 4001/4003 pickup cover question
Posted: Mon Sep 13, 2010 4:06 pm
by FretlessOnly
The shorter profile cover is not designed to move up and down with the pickup while the taller version is, so they install differently (but should be interchangeable as long as they are installed correctly but differently - basically the order in which you mount the cover, bushings and springs to the base plate). Here's a thread here that I started a few months ago that discusses all of the details:
viewtopic.php?f=17&t=395970&p=631530#p631530