Rickresource Rickenbacker Forum

I would like to put the bridge cover back on my vintage 330. I have the cover but not the two screws. Can anyone tell me if the screws are self tapping sheet metal screws or machine treaded screws. I don't want to screw up the treads by putting in the wrong screw type.

Thanks
Vinnie

Machine screws, Phillips. Either 3-48 X 1/4" or 4-40 X 1/4", depending upon year. I use polished stainless. The 4-40s are available from RIC; 3-48 can be sourced from specialty hardware dealers.