1991 Rickenbacker 350 complete rebuild
Moderator: jingle_jangle
1991 Rickenbacker 350 complete rebuild
So this may not be the easiest way to get one's dream 350 but I'm going to make it happen. I've wanted a 24 fret FIreglo 350 bound with checkerboard purfling since I was 13 and this guitar was brand new. I bought what you see from Len earlier in the week and was lucky enough to buy some checkerboard & binding just yesterday. No turning back now, the expensive flammable celluloid is on the way. I'll be using 2 fiber top HiGains from my '88WB and an HB-1 at the bridge. I've done various guitar mods, rebuilds, rewires, a couple refinishes & even built my own guitar but never something as in depth and detailed as I intend to do with this project.
It requires (obviously) a neck transplant. I recently traded Kenny my 1992 trans purple 330/12 for a 1991 JG 330. The JG 330 plays perfectly well but needs a refin. Seeing a 350 body from the same year up for grabs I knew what had to happen. The JG 330 will donate its neck. How could I desecrate a 330 like that? What to do? It took no time to figure that out. Time to also build a 30" scale bass neck for the 330. I have never been able to play full size basses all night without fatigue. So yes, this is not one major project but two. And yes, I am probably insane. More on that 330 bass project later.
Step 1 is stripping the 350's body with aircraft remover this week. Once the aircraft have all been ousted. I will decide if Amber Fireglo is in my future or I have to go solid, possibly turquoise like my other 330. Next is removing the back with a careful application of heat to soften the glue. Then I have to reglue the back together with titebond as it has split down the centerline. Same with the front between the pickup routes. Once this is all repaired I will make the stairstep on the front for the checkerboard purfling & binding. No rear binding, f hole or slash but I may have enough CB for the headstock. Progress will not be swift as this is going to take time to get right but I will update as I progress. Cheers for now!
Re: 1991 Rickenbacker 350 complete rebuild
That sounds great, Dom. Do keep us posted.
All I wanna do is rock!
- kennyhowes
- Veteran RRF member
- Posts: 4908
- Joined: Sat Jan 27, 2001 1:03 am
- Contact:
Re: 1991 Rickenbacker 350 complete rebuild
Thanks, Dom. I can't wait to see it as it progresses.
- deaconblues
- RRF Consultant
- Posts: 2390
- Joined: Tue Feb 06, 2007 5:14 pm
Re: 1991 Rickenbacker 350 complete rebuild
Cool project. Looking forward.
Re: 1991 Rickenbacker 350 complete rebuild
Great looking project Dom...looking forward to seeing plenty of pictures along the way!!
- 8mileshigher
- Senior Member
- Posts: 4871
- Joined: Tue May 23, 2006 12:34 pm
1991 Rickenbacker 350 complete rebuild
Cool project(s) you have going there, Dom !!
Looking forward to seeing step-by-step pictures
Looking forward to seeing step-by-step pictures
Re: 1991 Rickenbacker 350 complete rebuild
Also interested in the 330B project! Make sure you post about that one when it's turn comes up.
Re: 1991 Rickenbacker 350 complete rebuild
Yes looking forward to seeing the pics also interested in the 330 bass !
Re: 1991 Rickenbacker 350 complete rebuild
We need a popcorn emoticon on the RRF.scotty wrote:Yes looking forward to seeing the pics also interested in the 330 bass !
- Hotzenplotz
- Intermediate Member
- Posts: 942
- Joined: Sun Sep 26, 2010 8:51 am
Re: 1991 Rickenbacker 350 complete rebuild
Paint comes off Thursday! Nom mom nom!
Re: 1991 Rickenbacker 350 complete rebuild
What color will the 350 end up with?
Re: 1991 Rickenbacker 350 complete rebuild
If the wood looks good then amber fireglo since I've never seen one that way with checkerboard. I want it to have a nice gradual burst rather than a defined line. I see "Mglo" written on the inside of the control cavity which is a good sign. If not then I'm leaning towards turquoise. I also decided to keep the R tailpiece rather than a vibrato since I use the controls a bunch & want nothing in the way...they're a heck of a lot more close to the strings than the 330/370's I'm used to.johnallg wrote:What color will the 350 end up with?
Speaking of controls the 3 way will work the neck & mid & the bridge HB will be on a dedicated vol since that needs a 500k value. The neck & mid will both share a volume knob,.022 cap and tone knob and be on the blend. If I like how the phase switching goes on the 370wb I may add that on two push pulls. I may have the volumes up top as I can roll the neck/mid off & the bridge on with the side of my palm in one motion. This gives me 7 pickup combos plus 2 OOPs & tap.
Re: 1991 Rickenbacker 350 complete rebuild
Mglo points to nice wood, but the black might be in the grain and make the AFG not possible. Turquoise is always nice.