Page 1 of 1

Jackson Browne Model

Posted: Tue Oct 22, 2019 8:58 pm
by jcreasy
Kids,

I am wondering about the Jackson Browne model/prototype. I've done a little digging before asking... But here we go.

As near as I can tell, the Ricks on his albums are the BakeLite slide guitars. Right? I cannot find a PIC of him playing a standard Rick ES. Most of the songs I hear, apart from slide, I swear I hear a Stratocaster (though some MIGHT be a Rick solid body) though a Fender style amp. (Maybe a Tele)?

Did he play a Rick on recordings, or live, or, did he just respect the guitar and manufacturer and wanted to Church one up?

Any insight?

Thanks,

JKC

Re: Jackson Browne Model

Posted: Wed Oct 23, 2019 3:20 am
by doctorwho
For the prototype model, the only information I am aware of is in the Bacon and Day book.
(Reproduced for informational purpose only.)
(Reproduced for informational purpose only.)
(Reproduced for informational purpose only.)
(Reproduced for informational purpose only.)

Re: Jackson Browne Model

Posted: Wed Oct 23, 2019 8:57 am
by admin

Re: Jackson Browne Model

Posted: Wed Oct 23, 2019 4:35 pm
by jcreasy
Thanks, guys.

What I am wondering is if he played one, other than the "Panda" types and doing slide? I can't hear it anywhere. OR, was this an experiment/venture?

Doesn't really matter much either way (to me at least), I was just curious.

JKC

Re: Jackson Browne Model

Posted: Thu Oct 24, 2019 12:17 pm
by admin
I do not believe that Jackson Browne ever recorded with this model. I think RIC approached him but that, in the end, a deal was not reached. I am sure someone at the Factory may still recall. In any case, I am confident that John Hall would know. I do know that John Hall had three of these models at some point. Too bad that a signature model did not come out of this.

Re: Jackson Browne Model

Posted: Thu Oct 24, 2019 1:18 pm
by 8mileshigh
I was fortunate enough to buy one of John's three prototypes some time ago. A very interesting guitar. It's a shame the Limited Edition didn't happen.
IMG_1842.jpg

Re: Jackson Browne Model

Posted: Thu Oct 24, 2019 2:48 pm
by admin
Congratulations Graham. Why am I not surprised. :roll: :lol:
Please take a few moments and tell us more about it.

Re: Jackson Browne Model

Posted: Wed Oct 30, 2019 10:38 am
by jcreasy
Thanks for the replies.

Mr. Griffiths,

Can you share a description of how it sounds and how it is wired? My only point of reference is 360s with Hi-Gains and Toasters.

I am particularly interested in the humbucker. I've heard they more like a mini humbucker and can be splittable.

In any event, very pretty guitar.

JKC

Re: Jackson Browne Model

Posted: Wed Oct 30, 2019 3:11 pm
by iiipopes
jcreasy wrote:Thanks for the replies.

Mr. Griffiths,

Can you share a description of how it sounds and how it is wired? My only point of reference is 360s with Hi-Gains and Toasters.

I am particularly interested in the humbucker. I've heard they more like a mini humbucker and can be splittable.

In any event, very pretty guitar.

JKC
Thank you for letting me jump in here. I have played the humbuckers and I have one in a custom bass. Yes, they are splittable, but you have to undo the humbucker wiring of the two coils, separating the black and clear leads which are soldered together, to get to the individual coils. Frankly, in full humbucking mode, the top end drops off and the pickup has more mids, not like a toaster or high gain at all, more like a pickup designed for overdriving the front end of a Marshall. The DC resistance measures at @ 15 kohms in full humbucking mode. Split, you get some of the brightness back.

Link to HB-1 wiring code:
http://www.rickenbacker.com/pdfs/19521-HB1%20Wiring.pdf