Page 1 of 1
String post height
Posted: Mon Oct 19, 2020 8:54 pm
by Frogman47
What is the string post height of rickenbacker 325C64 & 360 schaller looks like kluson vintagedeluxe & hipshot griplock 3+3 need to know if it matches aswell as how to replace keystone with nickel oval as on kluson.com
Re: String post height
Posted: Tue Oct 20, 2020 1:31 pm
by Hotzenplotz
Schaller usually offers drawings of their products with all importantant measurements.
See here:
http://schaller.info/en/machine-heads/
Another information from here: I measured my 2010 330 and a 1958 capri: Both headplates play around 16mm. The capri differs a bit: 15,5mm at the end of the headstock, 16,5mm between the last tuner and the saddle. Thicker than that would hide the posts of the original cluson deluxe tuners too much. Close to the edge, maybe slightly over it - and factory made those days.
BTW: Schaller has defined headplate measurements in their sheets for a perfect fit.
Re: String post height
Posted: Wed Oct 21, 2020 4:33 am
by Frogman47
What are the perfect exact identical best with best 18:01 thumb screw nickel for each does anyone know if kluson revolution g mount non collard will fit post height