Page 1 of 2
New 4003/4003S Neck Profile
Posted: Sat Apr 22, 2023 12:02 pm
by rickenbrother
Have you ever played a 75 4001? They have a nice slim neck profile (front to back). Makes for very comfy, fast playing. I tried a few necks at the NAMM Show last weekend. The necks felt similar to my 75 4001FL. That's the way they're supposed to be, going forward.
The 4005 was sweet also!
Re: New 4003/4003S Neck Profile
Posted: Sat Apr 22, 2023 1:42 pm
by jps
Nice to read all this. I was wondering if with the single DA truss rod if the necks would get down to the early/mid'70s profile.
Re: New 4003/4003S Neck Profile
Posted: Sat Apr 22, 2023 2:28 pm
by rickenbrother
jps wrote: ↑Sat Apr 22, 2023 1:42 pmI was wondering if with the single DA truss rod if the necks would get down to the early/mid'70s profile.
Super comfy. I didn't think I'd be wanting a new 4003, but these are tempting.
Re: New 4003/4003S Neck Profile
Posted: Sat Apr 22, 2023 3:03 pm
by jps
rickenbrother wrote: ↑Sat Apr 22, 2023 2:28 pm
jps wrote: ↑Sat Apr 22, 2023 1:42 pmI was wondering if with the single DA truss rod if the necks would get down to the early/mid'70s profile.
Super comfy. I didn't think I'd be wanting a new 4003, but these are tempting.
PXL_20230415_194041842.jpg
PXL_20230415_194128260.jpg
I've heard from a higher authority that you have permission to get one, and a 4005, too!
Re: New 4003/4003S Neck Profile
Posted: Sat Apr 22, 2023 3:22 pm
by rickenbrother
jps wrote: ↑Sat Apr 22, 2023 3:03 pm
I've heard from a higher authority that you have permission to get one, and a 4005, too!
Voices in your head?
Re: New 4003/4003S Neck Profile
Posted: Sat Apr 22, 2023 5:56 pm
by jps
rickenbrother wrote: ↑Sat Apr 22, 2023 3:22 pm
jps wrote: ↑Sat Apr 22, 2023 3:03 pm
I've heard from a higher authority that you have permission to get one, and a 4005, too!
Voices in your head?
In
her voice, "Oh, honeypooh, you need more Ricks!
"
Re: New 4003/4003S Neck Profile
Posted: Mon Apr 24, 2023 9:07 am
by teeder
jps wrote: ↑Sat Apr 22, 2023 5:56 pm
rickenbrother wrote: ↑Sat Apr 22, 2023 3:22 pm
jps wrote: ↑Sat Apr 22, 2023 3:03 pm
I've heard from a higher authority that you have permission to get one, and a 4005, too!
Voices in your head?
In
her voice, "Oh, honeypooh, you need more Ricks!
"
I think I heard that, too!
Re: New 4003/4003S Neck Profile
Posted: Mon Apr 24, 2023 11:42 am
by jps
I hear it all the time!
Re: New 4003/4003S Neck Profile
Posted: Mon Apr 24, 2023 12:54 pm
by Isaac
I hear, "But where are you going to PUT them?"
Re: New 4003/4003S Neck Profile
Posted: Mon Apr 24, 2023 5:35 pm
by jps
Isaac wrote: ↑Mon Apr 24, 2023 12:54 pm
I hear, "But where are you going to PUT them?"
So far, that's never been a question that's been put to me regarding musical instruments. Antique furniture, on the other hand...
Re: New 4003/4003S Neck Profile
Posted: Sun May 21, 2023 1:41 am
by K9-4026
Fun Fact:
The late john Entwistle, in his 1975 (?) Guitar Player interview, stated that the THINness of Rickenbacker necks was what put him off with RIC's products.
If the old man's ticker had just held on a few years . . .
Re: New 4003/4003S Neck Profile
Posted: Mon May 29, 2023 3:08 am
by TimQ
Does anyone know the date the neck profile changed?
I have 4003s from September 2022 that arived in February 2023. I wasn't sure if it would have the lacquered fretboard but was relieved to find ir does along with the new single trust rod. It is fantastic to play but feels quite fat around the first three frets so not sure if it's the thin neck profile or not as it's the first Rickenbacker bass I have owned.
Re: New 4003/4003S Neck Profile
Posted: Fri Mar 01, 2024 3:56 am
by geofio
I purchased 2 new Rics end of 2023, an Autumnglo 4003 checkered binding satin finish, the neck profile is a flat D shape and is so skinny, the best Rickenbacker I have owned for playability, the satin fretboard and rear of the neck are incredible, sounds fantastic, was wondering if Rickenbacker made these necks extra slim on purpose , I have a late 2023 4003s which I have converted to V63 spec same with the neck has a flatter D shaped profile not as slim as the Autumnglo , but super comfy again fantastic playing and sounding bass, must say these new Ricks are excellent, zero flaws in both my new ones , love the new bridge/tailpiece, single truss rod and the skunk stripe.
Re: New 4003/4003S Neck Profile
Posted: Fri Mar 01, 2024 9:24 am
by teeder
geofio wrote: ↑Fri Mar 01, 2024 3:56 am
53167223341_5104af9e55_o.jpegI purchased 2 new Rics end of 2023, an Autumnglo 4003 checkered binding satin finish, the neck profile is a flat D shape and is so skinny, the best Rickenbacker I have owned for playability, the satin fretboard and rear of the neck are incredible, sounds fantastic, was wondering if Rickenbacker made these necks extra slim on purpose , I have a late 2023 4003s which I have converted to V63 spec same with the neck has a flatter D shaped profile not as slim as the Autumnglo , but super comfy again fantastic playing and sounding bass, must say these new Ricks are excellent, zero flaws in both my new ones , love the new bridge/tailpiece, single truss rod and the skunk stripe.Precision Bass-1195.jpg
They both looks great!
If I didn't have my V63, I'd probably get one.
Re: New 4003/4003S Neck Profile
Posted: Fri Mar 01, 2024 12:34 pm
by jps
teeder wrote: ↑Fri Mar 01, 2024 9:24 amIf I didn't have my V63, I'd probably get one.
Glad to read you still have yours; I thought you had sold it. Is it the MG from yonder year?