Page 1 of 2
Rickenbacker finish care
Posted: Wed Feb 02, 2005 2:07 am
by greg_mitchell
This might have been beat to death at some time or another but I can't find anything in the archives so.....What is the best way to protect the finish on my Ric bass? Waxes or cleaners? Just wipe it down with the supplied dust cloth? Anything else?
Posted: Wed Feb 02, 2005 4:30 am
by ken_j
There are a number of threads in "The Vibrola" Rickenbacker Technical Forum.
Posted: Wed Feb 02, 2005 6:04 am
by rictified
Liquid Turtle wax half and half, is the official recommendation
Posted: Wed Feb 02, 2005 8:15 am
by lowendbob
The one with the white cap without silicone.
I think John Hall said he personaly uses Martin Guitar polish. I use it myself. It's a nice spray on polish. I also use pure carnumba wax once and a while just to put a protective coat on the finish.
Posted: Wed Feb 02, 2005 8:20 am
by rictified
I tried carnuba wax and it makes the neck really sticky unless it was the formula I used, wasn't pure, I tried bowling alley wax once, now that was a mistake!
Posted: Wed Feb 02, 2005 8:25 am
by lowendbob
Try this Bob. It's not sticky. I mix it with just a couple drops of water, and wipe it on, and buff it out. Just like car wax.
http://www.steveclayton.com/polish.html
Posted: Wed Feb 02, 2005 8:48 am
by rhampshire
I use Zaino car polish - awesome stuff!
Posted: Wed Feb 02, 2005 1:34 pm
by cheyenne
Posted: Wed Feb 02, 2005 4:09 pm
by thx1955
Bob Young, you can't stop there ... what happened with bowling allley wax ???
Posted: Wed Feb 02, 2005 4:22 pm
by rictified
Haha! It was the stickiest stuff I ever used, you couldn't slide your hand on the neck for anything. I think they make it that way for bowling alleys so the balls have some friction or something when they go down the alleys, just a guess though. When you put your hand on the neck it was planted there. The worst part was that I couldn't get it off it was so tough.
Posted: Sun Feb 20, 2005 7:04 am
by rickfan60
I just tried the Meguire's 3 part finish care system on my 1980 460 with excellent results. Step one is an cleaner that lifts oils and grime off of the surface. Step 2 is non-abrasive polish. I am not sure how it works. The final step is carnuba wax. The finish was dull and worn looking when I started. No amount of buffing or guitar polish helped. It's original mirror-like shine. The finish is smooth to the touch and not at all sticky or waxy.

Posted: Sun Feb 20, 2005 8:33 am
by rickenbrother
Ted, I agree with the Meguiar's. I've been used it for years and I was always happy with the results.
Posted: Sun Feb 20, 2005 8:34 am
by henny
Just ordered a bottle of that Stewart-MacDonald stuff, Ted.
Looks pretty good.
Posted: Sun Feb 20, 2005 9:09 am
by ratso
Meguiar's or Martin Guitar polish are my choices, both work well. I typically do an initial cleaning and wax with Meguiars when I first acquire an instument then use Martins for periodic cleaning.
Posted: Sun Feb 20, 2005 9:51 am
by scottpro1969
Mark:
The Stew-Mac polish is good stuff.