Tone pot on my 1939 B6 does not work. Turn the tone knob all the way left and right, tone does not change. Volume knob works fine.
How to fix?
Is there somewhere to buy a replacement pot?
JonS
Rick. B6 Tone Pot not Working
Moderators: rickenbrother, ajish4
Re: Rick. B6 Tone Pot not Working
Yes. Get a 500k audio taper pot. Stewmac has them.
Re: Rick. B6 Tone Pot not Working
Are there any loose wires, are all the earths connected or is something touching where it shouldn't. If you have a DMM, you can check the resistance of the pot, from the centre lug to one of the outer lugs, wind the pot on and off to see if the resistance changes, if it does the pot may still be ok and the Capacitor may be the problem.
Re: Rick. B6 Tone Pot not Working
Yes, best to check it. Pots don't often fail, they certainly can, sometimes just get dirty, but generally get noisy/scratchy instead of just completely dropping out. Caps on the other hand, especially old types such as paper/oil and such that were around in the '30's and '40s often fail...Seans wrote:Are there any loose wires, are all the earths connected or is something touching where it shouldn't. If you have a DMM, you can check the resistance of the pot, from the centre lug to one of the outer lugs, wind the pot on and off to see if the resistance changes, if it does the pot may still be ok and the Capacitor may be the problem.
I have NO idea what to do with those skinny stringed things... I'm just a bass player...
Re: Rick. B6 Tone Pot not Working
The Allen Bradley Pots were certainly a quality item too, even for a mass production unit, a CTS pot is $5 or so now, bets they weren't far off that price in 1930.cjj wrote:Yes, best to check it. Pots don't often fail, they certainly can, sometimes just get dirty, but generally get noisy/scratchy instead of just completely dropping out. Caps on the other hand, especially old types such as paper/oil and such that were around in the '30's and '40s often fail...Seans wrote:Are there any loose wires, are all the earths connected or is something touching where it shouldn't. If you have a DMM, you can check the resistance of the pot, from the centre lug to one of the outer lugs, wind the pot on and off to see if the resistance changes, if it does the pot may still be ok and the Capacitor may be the problem.