Strings for 360?

General Rickenbacker discussion

Moderators: rickenbrother, ajish4

User avatar
admin
Site Admin
Posts: 15129
Joined: Wed Jul 05, 2000 5:00 am
Contact:

Post by admin »

Tom: I agree with Dave Harmon that substituting a 10 for the small E is produces a much fuller sound.
Life, as with music, often requires one to let go of the melody and listen to the rhythm

Please join the Official RickResource Forum Facebook Page https://www.facebook.com/groups/379271585440277
geebeevee
New member
Posts: 17
Joined: Mon Jun 14, 2004 8:53 am

Post by geebeevee »

I've been playing my 360 with the Ric .010's and to me they feel buttery soft--really too soft--I'm used to playing acoustic, so that might have something to do with it. I'm curious about the .012's. Anybody use these much?
User avatar
admin
Site Admin
Posts: 15129
Joined: Wed Jul 05, 2000 5:00 am
Contact:

Post by admin »

Joe: Give the 12's a whirl. You will be in good company. You will need a truss-rod adjustment, however.
Life, as with music, often requires one to let go of the melody and listen to the rhythm

Please join the Official RickResource Forum Facebook Page https://www.facebook.com/groups/379271585440277
User avatar
tony_carey
Advanced Member
Posts: 2055
Joined: Thu Oct 28, 2004 6:00 am
Contact:

Post by tony_carey »

I am new to the forum, but how about trying some Fender bullets, 10-46. They do 2 types, but I use the vintage, which is a little mellower, on my 360's. The Ric strings sound great, but if you are a hard player (like me), the lower strings tend to oscilate out of tune. If you play a lot, then I find that any string loses its tuning and sparkle in a surprisingly short time. I do play a lot & pretty hard, but I am lucky to get 10 days out of a set..normally only 5!
'Rickenbacker'...what a name! After all these years, it still thrills me.
johnashfield
Veteran RRF member
Posts: 723
Joined: Thu Mar 14, 2002 8:57 pm
Contact:

Post by johnashfield »

I had used 12's for a long time, but I find that the RIC 10 set has a sweeter sound. I substitute a .20w for the G. So essentially it's the lower octaves of the 12 string set.
bluespckr

Post by bluespckr »

I might be new to playing Rics, but I have been playing guitar over 35 years. I like the sound of round-wounds, and the feel of a 10 set (GHS 10-46 sound and feel good to me, but Regular Slinkys would do a good job, too) on my new Ric. Normally, or my old Fenders and Gibsons, I've played a hybrid 9-46 set. A lot of it has to do with finger size and strength -- bu the 10s feel like the 9s to me on the Ric -- and they sound great..

Personally, even if I could get 10 years out of a set of strings, I'd be changing them at least every three to four weeks (if I wasn't playing all that much)), or less (if I was gigging every weekend). So, the fact that XYZ string goes dead fast, ot whatever, who cares? Find a source (or a sale) for the strings you like at a cost of $3.50 or so a set and stock up.
User avatar
brammy
Senior Member
Posts: 5074
Joined: Thu Apr 07, 2005 5:00 am

Post by brammy »

"I'd be changing them at least every three to four weeks (if I wasn't playing all that much)), or less (if I was gigging every weekend)."

YIPES!!!! I'm gigging every weekend and I dont change the flatwounds on my 360 all that often. Maybe once every 2-monts or so, or unless there is a breakage.

Do you really think that new strings that often make that big a difference?
“The urge to save humanity is always a false front for the urge to rule it.” ....H. L. Mencken
Post Reply

Return to “Rickenbacker General: by Howard Bishop”