Amp recommendations, please

General Rickenbacker discussion

Moderators: rickenbrother, ajish4

eggman
Veteran RRF member
Posts: 240
Joined: Sat May 26, 2001 3:09 am

Post by eggman »

Gary,

A good, affordable vintage tone can be had with a SF Princeton, Princeton Reverb or even Deluxe Reverb. I prefer the former.
My new MG 360 (6 string) sounds good clean or slightly overdriven through my 1965 BF Princeton. Remember the Princeton Reverb has one extra gain stage, hence more overdrive capacity. Someday I might even get a Weber AlNiCo speaker patterened after the Vox Blue-Dog to get more "Mersey"-ful with my tone! Remember: 6V6 Fender amps. Try one.

Larry
ricjock
New member
Posts: 36
Joined: Sat Jun 25, 2005 9:58 am

Post by ricjock »

Thank u guys for your insight. Now I have 2 routes from which to choose. Bite the bullet and buy the AC 30 or first check out the SF Princeton or Valvetronix modeling amp. With a boy in college and another college-bound in 2 years, I'll start another "amp" fund. LOL
Thanks, Gary
User avatar
ozover50
RRF Consultant
Posts: 10492
Joined: Mon Jan 17, 2005 1:07 pm
Contact:

Post by ozover50 »

WOW!!!! Exclamation mark alert!!

Gary, my new AC-30CC1 is absolutely awe-summ!! I've only spent a couple of hours with the 330/6 plugged in, but I am amazed at the flexibilty and power of this thing. It's the loudest 30 watts RMS I've ever heard! Makes the little Roland Cube 30 seem like a 5 watt pocket amp!

It's got everything - from as clean as a shaved peach to as tight and crunchy as Terri Hatcher in a leather cat suit!!!

It comes with a card that gives you four sample settings - clean, classic, overdrive and crunch.
Clean is exactly that - pure, unadulterated and sweet.
Classic gives you a bit more low end with a hint of overdrive.
Overdrive is what it says - much higher pre-amp output with classic 60s distortion.
Crunch is stunning! If you wanna do that CSI Miami thing (can never remember the name of the Who song!), this is the one..... crikey!! I even sounded (for 3 seconds) like Pete Townshend!

The tremolo is classic, with the speed and depth controls and the reverb is brilliant, with heaps of variations through the dwell toggle and tone and mix controls.

I reckon you could play with this thing every day for a year and still not discover all the possibilites - the variations seem endless - from subtle to massive!!

I haven't put the Tonelab SE through the effects loop yet but I'll get to that in the near future.

Please do yourself a favour and try one out, Gary. Listening tests favoured the AC-30CC1 over the CC2 - the single 12" Celestion Neo-dog produced a richer sound with more 'grunt' than the twin Wharfedales in the CC2 (and about 15 pounds less weight).

When you take the price into consideration, its even better!!

Cheers........ H Image
"Never eat more than you can lift." - Mr. Moon
User avatar
jsm610
Intermediate Member
Posts: 1074
Joined: Mon Apr 19, 2004 5:00 am
Contact:

Post by jsm610 »

I'd be interested in how the ToneLab sounds through the AC-30CC1. I've tried all I can think of and can't get a decent sound with my SE and an AC-30TBX. I gave up and got an Atomic...
User avatar
ozover50
RRF Consultant
Posts: 10492
Joined: Mon Jan 17, 2005 1:07 pm
Contact:

Post by ozover50 »

Depends what you mean by 'decent sound', John. What are you looking for?
"Never eat more than you can lift." - Mr. Moon
User avatar
jsm610
Intermediate Member
Posts: 1074
Joined: Mon Apr 19, 2004 5:00 am
Contact:

Post by jsm610 »

Well the ToneLab has a bunch of great models, I guess I wanted to use some of the sounds live: a good clean, a good overdrive, etc. I really like the Fender Twin, the Dumble clean, the JTM-45, and the Bassman sounds on the SE. Through the AC-30, they sounded like an AC-30 with some overdrive... I ended up using the SE as a pedal board, switching the amp and cab simulators off.

With the Atomic, you can get a better use of the SE IMO. The AC-30 sounds through the Atomic are close enough. I may get the 2x12 when it comes out...
User avatar
jingle_jangle
RRF Moderator
Posts: 22679
Joined: Wed Dec 22, 2004 6:00 am
Contact:

Post by jingle_jangle »

You over-equipped yourself, John, with the SE. It's a tinkerer's paradise, but it sounds like you know what you like, and it's a half-dozen very specific sounds. The SE is a very expensive pedal-board!
“I say in speeches that a plausible mission of artists is to make people appreciate being alive at least a little bit. I am then asked if I know of any artists who pulled that off. I reply, 'The Beatles did.”
― Kurt Vonnegut
kevin
Veteran RRF member
Posts: 184
Joined: Sun Mar 03, 2002 1:50 pm
Contact:

Post by kevin »

John,

I wouldn't run a Tonelab through an amp. You're putting unwanted tonal coloration onto the sound. Run it through a clean power amp and from there into a cab.
User avatar
jsm610
Intermediate Member
Posts: 1074
Joined: Mon Apr 19, 2004 5:00 am
Contact:

Post by jsm610 »

Yes Kevin, agreed! That's pretty much what the Atomic is - it is a tube power amp/combo with no pre-amp. It is designed for these modelers (POD, ToneLab, etc), and is about the same dimensions as an AC-30...

Image
User avatar
jingle_jangle
RRF Moderator
Posts: 22679
Joined: Wed Dec 22, 2004 6:00 am
Contact:

Post by jingle_jangle »

The hatch on top is actually where the POD or other modeler would fit. They sell various shaped inserts to nest your modeling device.

I do use my SE with an amp, and run it on its "clean tube" setting so the modeler can do its thang. A good pair of headphones is all the SE really needs, though.
“I say in speeches that a plausible mission of artists is to make people appreciate being alive at least a little bit. I am then asked if I know of any artists who pulled that off. I reply, 'The Beatles did.”
― Kurt Vonnegut
shinynewtoy
Intermediate Member
Posts: 1347
Joined: Fri May 27, 2005 7:46 pm

Post by shinynewtoy »

Those Atomic setups are sweet looking, but they forgot about us bassists! Now if they'd just come up with a 4x10 cab, I'd be in...

In the meantime, I'm looking for a good, transparent power amp. Any ideas?
What do you mean the Bass is too loud???
User avatar
jps
RRF Consultant
Posts: 37497
Joined: Wed Feb 12, 2003 6:00 am

Post by jps »

"I'm looking for a good, transparent power amp. Any ideas?"

Let's see...Aragon, Jeff Rowland Designs, Krell, Mark Levinson. Oh, you mean for your bass rig? SWR, QSC, Stewart...
shinynewtoy
Intermediate Member
Posts: 1347
Joined: Fri May 27, 2005 7:46 pm

Post by shinynewtoy »

Jeff...

I'm looking for something to run my Pod through. I've really grown to love the sounds that I get from it and running it as a DI serves me great for recording, but I've finally gotten back in contact with the best drummer I've ever played with so I'm looking for ideas.

QSC amps look good and the price range is livable... all I want out of a power amp is wattage and an utter lack of it's own sound.
What do you mean the Bass is too loud???
ricjock
New member
Posts: 36
Joined: Sat Jun 25, 2005 9:58 am

Post by ricjock »

Would you recommend a chorus amp for a Rickenbacker? I tried an older Fender Princeton Chorus and the clean sound was superb to my ears.
ricjock
New member
Posts: 36
Joined: Sat Jun 25, 2005 9:58 am

Post by ricjock »

Well folks,
I took a positive step toward tone. I bought a tube amp. It's not the Vox AC-30, but something affordable for me at the present time. The Fender Blues Jr. is a great "starter" tube amp for me.... lightweight, cool looking grill, and Tubes! It'll do for the time being. The Ric sounds fine with this little gem. My son's strat-style Ibanez solid body sounds pretty mean thru it too.
I prefer the clean tones and the reverb, but have the option to crank the dials around to add a little distortion.
Thank you all for your suggestions. When I become a better player I may invest in the other amps some of you have suggested.
Post Reply

Return to “Rickenbacker General: by Howard Bishop”