Anyone get a 360/12c63 yet?

johnhall · Post by **johnhall** » Mon Feb 28, 2005 7:04 am

Robert- the neck, body, headstock, pickguard, nameplate are all different. The string geometry in the head slots, the neck profile, and the true, glued in x-brace in the body are probably the biggest differences, among many small ones.

red_rob · Post by **red_rob** » Mon Feb 28, 2005 7:11 am

Thanks Mr Hall sir!

joepee · Post by **joepee** » Mon Feb 28, 2005 7:13 am

Mr. Hall,

How many hours does it take, start to finish, to complete one of these beauties? I certainly mean if you already had wood, parts and research out of the way.

goldenoldie · Post by **goldenoldie** » Mon Feb 28, 2005 8:09 am

Hey, it's been a great weekend.
Thanks for the responses, thanks to Peter for posting those pics, & a HUGE congratulations to RIC. I'm sorry if some of you were unable to receive the pic files.

This guitar really sings, and as I've mentioned to some of you, the 360-12c63 knew it was a guitar right out of the box. It's alive.
I've been downloading song after song into it's heart...starting with lots of Beatles, Beach Boys and Byrds. It's a tone monster through a Fender solid state or Vox (my preference), and plays effortlessly - even fretting across the first fret. The set-up is perfect.

I'll answer some of your questions...
Yes, all photos are of the same guitar. The long leg of the trapeze measures 3-1/4".

For me, the fireglow coloring is perfect - very light cherry red, and the burst is feathered beautifully to a flawless piece of light wide grained maple with a little pink near the neck pick-up. Obviously the color varies depending upon lighting conditions. It looks better in 3D than in the pictures.

The s/n is 0503900... If I understand the system correctly, it's the 900th guitar made during the 3rd week of Jan. '05.

Did George ever do any mods?
The only future mod I may consider is having the wiring changed for ric-o-sound and buy the kit before it's discontinued. I currently don't have a ric-o-sound guitar - and that might be a fun option. I'm going to keep the 6 saddle bridge unless I eventually run across tuning problems - I'm picky about tuning issues...so far, no problem at all - intonation is also great.

While testing the electronics, the only problem I detected was with the Treble(bridge)tone control.
With the switch down in the bridge position, both neck controls rolled back and the bridge volume control fully opened, the bridge tone control decreases the volume just before I roll it to full open position...maybe there's a reason for this, or I'm doing something wrong.
Any opinions?
If I get the ric-o-sound mod, then I'll have that checked out.

The only thing I wish the guitar had is crushed pearl inlays. I know - George's didn't, and they can't get the stuff anymore. Maybe some of us should get a boat and travel to that little mysterious magical island - pick up a load of the stuff, carry it back here and "discover" it off Newport Beach. Finding a Ric w/ crushed pearl inlays will be my next challenge.

To those that placed your orders....your long wait is almost over. Hope you enjoy the 360-12c63.

tonewerks · Post by **tonewerks** » Mon Feb 28, 2005 10:20 am

I hope to have mine this week ;^}

johnny_ola · Post by **johnny_ola** » Thu Oct 13, 2005 12:49 pm

G'day guys,,I too have recently received a C63 12 string,and was wondering if the tone control works with the switch in the down position?
The guitar is a CLASSIC,I feel I am in a time warp.

tonewerks · Post by **tonewerks** » Tue Oct 25, 2005 6:52 am

it should - does your lower input jack work ?

johnhall · Post by **johnhall** » Tue Oct 25, 2005 7:23 am

What does that have to do with anything? It's a parallel mono output guitar.

tonewerks · Post by **tonewerks** » Thu Nov 10, 2005 10:17 am

just asking because mine doesn't --- wondering if they were wired the same -- cool guitar thoe