What do you guys make of this?
Moderators: rickenbrother, ajish4
-
rickaddict
- Senior Member
- Posts: 6163
- Joined: Mon Mar 29, 2004 7:46 am
- bob_atherton
- Intermediate Member
- Posts: 1441
- Joined: Thu Jan 06, 2005 4:47 am
- bob_atherton
- Intermediate Member
- Posts: 1441
- Joined: Thu Jan 06, 2005 4:47 am
So, you guys were right about the inlays. I had a feeling but it was just poor photography. The good news is the bass is very clean. It has a few minor chips and one neck ding - nothing major. Quite a steal at $750. It has the usual clueless player stuff wrong with it, wacky string job, over-tightened neck pickup screws, the setup was horse ****. VERY high action because the bridge was cranked up. The E side allen screw is stripped out so I will have to dig one out of the parts drawer. BTW it warmed up quite a bit here in the last day and apparently UPS did not store the bass outside very long. The box and case were not cold to the touch when it arrived so I took a peek inside the case on my 45F front porch. The metal hardware was not cold so I closed it up right way and took it inside. I waited about 5 hours then opened it.


-
shinynewtoy
- Intermediate Member
- Posts: 1347
- Joined: Fri May 27, 2005 7:46 pm
- bassduke49
- Senior Member
- Posts: 6580
- Joined: Wed May 14, 2003 5:00 am
- thinneckrick
- Intermediate Member
- Posts: 573
- Joined: Thu Mar 17, 2005 5:59 am
- Contact:

