Howdy,
Would a 360/330 pickguard fit on a 381? I'd consider a 381, but for the strange looking pickguard. Sorry If I've offended.
Eggman
360 pickguard fits 381?
Moderators: rickenbrother, ajish4
-
jingle_jangle
- RRF Moderator
- Posts: 22679
- Joined: Wed Dec 22, 2004 6:00 am
- Contact:
There is the problem of the screw which secures the upper right corner. Putting a 360-style guard onto a 381 leaves that screw hole up there...
Not that the guard would fit anyway, you understand...the screw holes will be different.
I did a guard for my own 381 that is transparent acrylic, with the upper one trimmed to a 360-type shape, back painted, and the lower back-painted to the 360 shape, with the "horn" area being left transparent. I engraved a groove on the back of the lower guard to separate the painted from the unpainted area visually.
Not that the guard would fit anyway, you understand...the screw holes will be different.
I did a guard for my own 381 that is transparent acrylic, with the upper one trimmed to a 360-type shape, back painted, and the lower back-painted to the 360 shape, with the "horn" area being left transparent. I engraved a groove on the back of the lower guard to separate the painted from the unpainted area visually.
“I say in speeches that a plausible mission of artists is to make people appreciate being alive at least a little bit. I am then asked if I know of any artists who pulled that off. I reply, 'The Beatles did.”
― Kurt Vonnegut
― Kurt Vonnegut