Paul's Magical Mystery Bass
Moderators: rickenbrother, ajish4
RE the toggle position--Some food for thought here, since I recently re-wired a 4001...
I doubt if Electro-String used a harness that was just 'laying around' for Paul's bass...For a start, the wire lengths in the harness are pre-cut and soldered for either a right handed bass, or a left-handed bass----everything has to be laid out in advance to maintain a proper fit. This is why RIC offers righty and lefty harnesses for basses, the pots are oriented differently from each other.
It's possible that it may have been created right on the 'guard..if it really IS the first lefty Rickenbacker bass, who knows...
I won't say it's impossible, but you'd have to do a mighty bit of bending around in order for a righty harness to fit on a lefty 'guard. I know this 'cause I mistakenly ordered a righty harness once and it wouldnt fit. Got the correct one from Kenny, and all was/is well.
Paul used the bridge mute alot and very little tone-tweaking on his 4001-S, like the Hofner 'thunk' but a smoother, more even sound. With a V63, a good set of flats and proper muting, that sound can be brought out. I did it last night at home on my PMC.
I doubt if Electro-String used a harness that was just 'laying around' for Paul's bass...For a start, the wire lengths in the harness are pre-cut and soldered for either a right handed bass, or a left-handed bass----everything has to be laid out in advance to maintain a proper fit. This is why RIC offers righty and lefty harnesses for basses, the pots are oriented differently from each other.
It's possible that it may have been created right on the 'guard..if it really IS the first lefty Rickenbacker bass, who knows...
I won't say it's impossible, but you'd have to do a mighty bit of bending around in order for a righty harness to fit on a lefty 'guard. I know this 'cause I mistakenly ordered a righty harness once and it wouldnt fit. Got the correct one from Kenny, and all was/is well.
Paul used the bridge mute alot and very little tone-tweaking on his 4001-S, like the Hofner 'thunk' but a smoother, more even sound. With a V63, a good set of flats and proper muting, that sound can be brought out. I did it last night at home on my PMC.
Could be, Andy. My thoughts are that if the toaster was activated on the down postion on the switch, then they used a righty harness and just bent it in there....Or, it was just wired up that way--someone who was at the bench just got it backward....I agree, most of Paul's Beatle-era Rickenbacker tone sounds like both p/ups on or the toaster being the dominant p/up. Maybe the shoes were weak early on, they wouldn't recharge according to Arnquist...and so it goes!
- karl_teten
- Intermediate Member
- Posts: 552
- Joined: Sun Apr 10, 2005 4:09 pm
I have spoken with Mark Arnquist on several occasions regarding all the old parts from McCartney's bass. There has never been any mention of finding any strange wiring design.
Paul desperately wanted to get bass sounds like he heard on old Tamala-Mowtown records. In his quest he was stuck with low wattage tube amps for the most part (100 watts max) with 15" speakers. After heavy mix down compression, his tones were bottom heavy but muddy at times.
As for those old bass parts......they are somewhere deep in a California landfill.
Paul desperately wanted to get bass sounds like he heard on old Tamala-Mowtown records. In his quest he was stuck with low wattage tube amps for the most part (100 watts max) with 15" speakers. After heavy mix down compression, his tones were bottom heavy but muddy at times.
As for those old bass parts......they are somewhere deep in a California landfill.

- atomic_punk
- Senior Member
- Posts: 5093
- Joined: Wed Sep 17, 2003 5:00 am
- Contact:
-
jwr2
I believe it was JH's father along with JH who went to England, not sure but I think I remember reading that somewhere, I believe it was his father who presented them with the guitars. It's probably in the Ric book which is buried somewhere right now from my recent move.
I also don't believe he could have gotten that sound with a capped horseshoe, actually a capped anything. Although I did get a good sound out of an SVT with a a capped 4001 with mostly the bridge pickup, bass run stereo, could have been decapped though but I don't think so. It took quite a bit of tweaking to get bottom though. I played Everybody's got Something to hide 'cept Me and My Monkee like that with a pick and it sounded just like the record although people say that record was predominantly the J bass which I have reservations about.
I hate to disagree but I thought his bass sound went out the window along with George Martin, it was also usually too loud in the mix in Wings. Acoustic 360's are great for that tuba sound, they are like playing through subwoofers.
I also don't believe he could have gotten that sound with a capped horseshoe, actually a capped anything. Although I did get a good sound out of an SVT with a a capped 4001 with mostly the bridge pickup, bass run stereo, could have been decapped though but I don't think so. It took quite a bit of tweaking to get bottom though. I played Everybody's got Something to hide 'cept Me and My Monkee like that with a pick and it sounded just like the record although people say that record was predominantly the J bass which I have reservations about.
I hate to disagree but I thought his bass sound went out the window along with George Martin, it was also usually too loud in the mix in Wings. Acoustic 360's are great for that tuba sound, they are like playing through subwoofers.
I think John and Kevin have it right.
LET THE WORLD KNOW YOU WANT PAUL TO BRING BACK THE 4001. JOIN OUR FACEBOOK GROUP!! http://www.facebook.com/group.php?gid=147641915268984
I had read that they were presented the guitars in New York City before their first Ed Sullivan Show appearance. F.C. Hall had rented a suite in a hotel there to showcase the guitars. Especially the 360/12 guitar that George got.
I recently went back to playing a Rickenbacker bass. Its like meeting an old friend again
