Cleaning 48 year old tuners?
Moderator: jingle_jangle
Cleaning 48 year old tuners?
Hi Paul,
I have a set of 48 year old Grover Sta-Tites. They are very nice but need a serious cleaning to remove a half-century of tarnish. I normally use MAAS polish on old Klusons but these things have so many crevasses that I feel like I am wasting my time. Is there a definitive way to get them back to a bright clean shine? There is no corrosion or oxidation present.
Russ
I have a set of 48 year old Grover Sta-Tites. They are very nice but need a serious cleaning to remove a half-century of tarnish. I normally use MAAS polish on old Klusons but these things have so many crevasses that I feel like I am wasting my time. Is there a definitive way to get them back to a bright clean shine? There is no corrosion or oxidation present.
Russ
"Silly Rabbit! Trix are for Kids"
-
dale_fortune
- Intermediate Member
- Posts: 1241
- Joined: Sat Oct 30, 2004 6:00 am
Russ Jewelers use a Sonic Bath to clean Silver and Gold. Sta-Tites were Nickel plated and if no pits or other issues are about them, this is the easy way to clean them. You know how simple they are to take apart. Lube the Worm and Gear with Vaseline when putting them back together. If you want to do it by hand, Meguiars #2 cleaner, that can be bought at most automotive stores, with a cotton cloth works great on projects like this.
- jingle_jangle
- RRF Moderator
- Posts: 22679
- Joined: Wed Dec 22, 2004 6:00 am
- Contact:
Good morning, Russ.
I will clamp the tuner post in a vise and use a toothbrush with some Perfect-it III to scrub them thoroughly. Then I will soak them in a mix of 3/4 paint thinner (NOT lacquer thinner) and 1/4 ordinary mineral oil, again scrubbing them a bit with the toothbrush. This removes the fine abrasive from the moving parts. Lay them on a paper towel or clean cloth to dry. Wipe them a bit and re-install them.
I will clamp the tuner post in a vise and use a toothbrush with some Perfect-it III to scrub them thoroughly. Then I will soak them in a mix of 3/4 paint thinner (NOT lacquer thinner) and 1/4 ordinary mineral oil, again scrubbing them a bit with the toothbrush. This removes the fine abrasive from the moving parts. Lay them on a paper towel or clean cloth to dry. Wipe them a bit and re-install them.
“I say in speeches that a plausible mission of artists is to make people appreciate being alive at least a little bit. I am then asked if I know of any artists who pulled that off. I reply, 'The Beatles did.”
― Kurt Vonnegut
― Kurt Vonnegut
- beatlefreak
- Senior Member
- Posts: 6160
- Joined: Wed Jun 14, 2006 5:45 am
- Contact:
