Short Scale Suggestions
Moderators: rickenbrother, ajish4
-
hoptownbass
- New member
- Posts: 41
- Joined: Wed Jun 21, 2006 9:38 pm
I have owned a Gretsch Broadkaster. It was a fine bass, just kind of bla (IMHO). There is a great company out of Texas that specializes in short scales basses. If you're into short scale basses check them out at www.birdsongguitar.com. They’re true artist and they won’t break your bank. I have one on order right now. The starting price is right around $1,500.
-
hoptownbass
- New member
- Posts: 41
- Joined: Wed Jun 21, 2006 9:38 pm
Heh I had the opposite reaction - not so nice looking. But hey, to each his (or her) own. Style-wise I guess I'm partial to single cutaway basses such as the Broadkaster, Guild M-85, and Hofner Club. Ah but to have a modern Rick short-scale bass...sigh.
Barry have you found anything yet that is worth your hard-earned pay?
Barry have you found anything yet that is worth your hard-earned pay?
Sytý Hladovému Nevěří
A friend who plays primarily high-end long-scale basses can't say enough good things about her two Landing basses-they run approximately $1200 a copy with lots of options.
http://www.landingbass.com/New%20Main%20Page.html
Also, my wife plays a '98 Dano longhorn reissue as a short-scale alternative to her Jazz Bass...with a little intonation and fret work and a set of TI flats, you will get very, very old school sounds. We just got her a Yamaha NE-1 preamp to go with the '67 Fender Bassman amp (1 x15" in a combo cabinet)
and boy oh boy, will it "Take You There". It is capable of a good modern midrangey rock growl, too. This is a *lot* of bass for $300 or so.
What kind of amp rig are you running?
CK
http://www.landingbass.com/New%20Main%20Page.html
Also, my wife plays a '98 Dano longhorn reissue as a short-scale alternative to her Jazz Bass...with a little intonation and fret work and a set of TI flats, you will get very, very old school sounds. We just got her a Yamaha NE-1 preamp to go with the '67 Fender Bassman amp (1 x15" in a combo cabinet)
and boy oh boy, will it "Take You There". It is capable of a good modern midrangey rock growl, too. This is a *lot* of bass for $300 or so.
What kind of amp rig are you running?
CK
"You Can't Glue Glue To Glue!"
Hi Corey . I am using a Gallien-Krueger MB150S head with Avatar Neo 1-12 and Avatar Neo 210 cabs . A very mini but potent stack for the lower volumes I play at . I will check out the Landings and definately buy another Dano . I just bought an all Warmoth P bass with Jazz neck dimensions so I will see how the thin neck works for me .
More throttle...Less brakes
- firstbassman
- Advanced Member
- Posts: 1573
- Joined: Thu Dec 15, 2005 6:00 am
Sorry, late to this thread.
I also have the Jay Turser JTB-134 and like it very much.
There's me playing mine at a gig:
http://www.beltwayrockers.com/bios.html
Barry C - I also had an intonation problem with my JTB-134. But brought it to the shop and now all is well.
My only complaint with the Turser is that the tone knob doesn't really change the tone at all very much. At least not to my ears.
The Birdsongs look very nice but I'm afraid $1500 right now for me does come close to breaking the bank.
If you are considering the budget route - the Ibanez GAXB is a great little machine.
http://www.ibanez.com/guitars/series.asp?s=gaxb&l=b
I also have the Jay Turser JTB-134 and like it very much.
There's me playing mine at a gig:
http://www.beltwayrockers.com/bios.html
Barry C - I also had an intonation problem with my JTB-134. But brought it to the shop and now all is well.
My only complaint with the Turser is that the tone knob doesn't really change the tone at all very much. At least not to my ears.
The Birdsongs look very nice but I'm afraid $1500 right now for me does come close to breaking the bank.
If you are considering the budget route - the Ibanez GAXB is a great little machine.
http://www.ibanez.com/guitars/series.asp?s=gaxb&l=b
-
sabbath_of_bass
- Intermediate Member
- Posts: 699
- Joined: Tue Jun 21, 2005 4:16 pm
- Contact:
I didn't read all this... Sorry. But I mean theres only like 5 pages
. Im a little behind. But How much of a difference is their within a long and short scale. And well the difference really help your hands that much? I have a short scale acoustic. I didn't notice it until playing it a few times. All the other are long scales then Iv played a 35 (i think.. cus most is 34 right?) and Iv never really noticed a difference in any of them. I just adapt like normal.
Just didn't think their would be enough difference to help any problems with your hands.
Just didn't think their would be enough difference to help any problems with your hands.
Jacob . In my case.....I was playing a Dingwall Afterburner 5 string 37" scale and a 64 P Bass ..........no problem.....until I had a bad motorcycle accident........both wrists broken.....the scar tissue that developed during healing has created a rotation limitation in my left wrist.........can not reach the lower notes on the large neck Dingwall etc........I have discovered 30" scale or a narrow Jazz style neck is a little better to get around on . I also had my 4004 Cii converted to a 5 string ( Mr Rath ) so the E thru G are closer together . My 77 4001 has a very thin neck that is also easy to play.....but......I do not like the binding .
More throttle...Less brakes
- firstbassman
- Advanced Member
- Posts: 1573
- Joined: Thu Dec 15, 2005 6:00 am
Jacob, funny you should ask. I just posted something about this over on the RIC site.
Here are some measurements.
The difference between the distance of the 2nd and 3rd fret on a 34" and a short-scale is only 3/32 of an inch. And you're right. That alone doesn't make much of a difference. However, if we add that up when spanning four frets with four fingers, it comes to about a 1/3 of an inch more that your hand has to spread (at the lower end). That can be a lot for people with small hands. I can play both, the small scale just feels more comfortable. It also looks better - better proportions compared to the human playing it.
[PS: Casady played a short-scale Guild for several years and now his signature model is standard length and he seems to be doing fine.]
Barry, interesting that your bridge might be different. I'm curious to see. Do you have a photo? I can post a close-up too of mine.
Here are some measurements.
The difference between the distance of the 2nd and 3rd fret on a 34" and a short-scale is only 3/32 of an inch. And you're right. That alone doesn't make much of a difference. However, if we add that up when spanning four frets with four fingers, it comes to about a 1/3 of an inch more that your hand has to spread (at the lower end). That can be a lot for people with small hands. I can play both, the small scale just feels more comfortable. It also looks better - better proportions compared to the human playing it.
[PS: Casady played a short-scale Guild for several years and now his signature model is standard length and he seems to be doing fine.]
Barry, interesting that your bridge might be different. I'm curious to see. Do you have a photo? I can post a close-up too of mine.
