A comment on branding.

General Rickenbacker discussion

Moderators: rickenbrother, ajish4

Post Reply
User avatar
s4001
Senior Member
Posts: 3514
Joined: Sat Jul 16, 2005 5:00 am
Contact:

A comment on branding.

Post by s4001 »

While chatting with my co-worker I mentioned that my guitarist has a '59 Strat with rosewood neck and I gig with my '68. I told him that the Strat was probably worth 30K or so. He asked if it worries my guitarist & I to gig with such rare, expensive instruments. I said that it is more of a concern to me than my guitarist because of all the reisssues, fakes and relic'd Fenders out there, nobody would assume his Strat is the real deal. Whereas nobody has ever knocked-off or faked old Rics to any degree of success so nobody would assume my Ric is anything but the real deal.

There ya have it.
"If you think you can or if you think you cannot - either way you are right." Henry Ford.
kcole4001
Senior Member
Posts: 3368
Joined: Tue Jul 19, 2005 7:07 pm

Post by kcole4001 »

Interesting point, and very true!
Thank the Halls for that!
Plus five minus five!
skeeterbuck
Junior Member
Posts: 165
Joined: Tue Jun 01, 2004 5:00 am

Post by skeeterbuck »

I think that the reason for that maybe the current market for Ricks.
Recently that '58 360F went on Ebay for a little over 18 grand. Old refin strats start at that. If Ricks get to the 30 to 40 thousand area, I sure that some people would consider making copies and pawning them off as originals.
I don't think that the prices are high enough and the market big enough to get their attention. They would probably be so good that the experts would not be able to tell them apart. IMHO...If they can do it with a Les Paul, they can do it with any guitar.
User avatar
jingle_jangle
RRF Moderator
Posts: 22679
Joined: Wed Dec 22, 2004 6:00 am
Contact:

Post by jingle_jangle »

The down side of this--and the reason RIC purses violations so very aggressively--is that when a person sees a cheap cruddy knockoff to which some dorque has affixed a "Rickenbacker" nameplate--he assumes it's the real deal.

That's "brand dilution", is dangerous to a brand's survival because of the threat to reputation and perceived value, and is thus actionable.

RIC has won every single case it's taken to court on this and other intellectual property issues.
“I say in speeches that a plausible mission of artists is to make people appreciate being alive at least a little bit. I am then asked if I know of any artists who pulled that off. I reply, 'The Beatles did.”
― Kurt Vonnegut
User avatar
studiotwosession
Advanced Member
Posts: 2215
Joined: Fri Jul 29, 2005 1:36 pm

Post by studiotwosession »

Some others here might also disagree that a '59 strat is indeed a "rare" guitar.

Pricey or not, unless it is indeed a rare color, Fender was cranking them out by the thousands. And vintage shops are filled with them.
This is off the record
User avatar
jnbass
Veteran RRF member
Posts: 5359
Joined: Mon Mar 05, 2001 7:58 am

Post by jnbass »

I just wish they'd make more of these...
Image
Buy it before someone else does
User avatar
jingle_jangle
RRF Moderator
Posts: 22679
Joined: Wed Dec 22, 2004 6:00 am
Contact:

Post by jingle_jangle »

What the hell is that thing you keep harping about, Jared?

(ROFLMAO)
“I say in speeches that a plausible mission of artists is to make people appreciate being alive at least a little bit. I am then asked if I know of any artists who pulled that off. I reply, 'The Beatles did.”
― Kurt Vonnegut
User avatar
johnhall
RIC
Posts: 3926
Joined: Tue Sep 26, 2000 11:17 am
Contact:

Post by johnhall »

Looks like an electrified ice skate. Or a door bell mechanism. Or the klaxon from a U boat.
User avatar
elysrand
Advanced Member
Posts: 2757
Joined: Fri Nov 17, 2006 6:00 am

Post by elysrand »

Hey Jared, they ARE making more of these Ham Radio keyers... they are just not selling them to any of us unless there is a new guitar attached to the pickup as an accessory Image
Do unto others as you would have them do unto you, and sit in with the band whenever you can, to keep your chops up!
User avatar
elysrand
Advanced Member
Posts: 2757
Joined: Fri Nov 17, 2006 6:00 am

Post by elysrand »

Umm, it does kinda look like part of the plotter actuators from an old early 1970s Gould electrostatic plotter that I used way back in engineering school to plot graphics from stacks of Hollerith punchcards on our Sperry-Rand UNIVAC 1106. Had to replace one that burned out once. Had a program named DRAWL to do the programming of the plot points, ran as a subroutine under FORTRAN.
Do unto others as you would have them do unto you, and sit in with the band whenever you can, to keep your chops up!
User avatar
jps
RRF Consultant
Posts: 37496
Joined: Wed Feb 12, 2003 6:00 am

Post by jps »

"Umm, it does kinda look like part of the plotter actuators from an old early 1970s Goulds electrostatic plotter that I used way back in engineering school"

Gould plotters were made right around the corner from my lab. I worked there for a while right after I got out of high school.

www.labwork-bw.com
User avatar
jdogric12
Rick-a-holic
Posts: 10925
Joined: Thu Dec 29, 2005 6:00 am

Post by jdogric12 »

Rock the Fortran! I remember using that.
User avatar
lyle_from_minneapolis
Advanced Member
Posts: 2530
Joined: Sun Nov 19, 2006 7:13 pm

Post by lyle_from_minneapolis »

It's a High Gain Submarine Sandwich.
Here is where I hide my music:
http://www.soundclick.com/MarkKaufman
gavin
New member
Posts: 30
Joined: Fri Jan 20, 2006 6:00 am

Post by gavin »

It is the toaster Quizno use to bake their Quizno's sandwich..........I think.
Post Reply

Return to “Rickenbacker General: by Howard Bishop”