Interesting 8 string bass neck

Vintage, Modern, V & C series, Fretless, Signature & Special Editions

Moderators: rickenbrother, ajish4

User avatar
jsod
Junior Member
Posts: 121
Joined: Sat Sep 09, 2006 4:14 am

Post by jsod »

If the photo is from the '90's, then that guy is making an awful lot of custom instruments for himself - look at all the walnut wings!

I'm puzzled.
User avatar
jingle_jangle
RRF Moderator
Posts: 22679
Joined: Wed Dec 22, 2004 6:00 am
Contact:

Post by jingle_jangle »

I wouldn't be. There's nothing except your assumptions at work here. There's always stuff being tried out, rejected and half-finished parts to be found in a shop situation. Oftentimes, there will be sample parts or pattern parts present, too.

Were you to see the section in question in the Rittor "mook", it would be obvious that, right from the beginning shot of the exterior of the Rick factory (with the cars parked out front being from the mid-'90s), through the tour, that the photos were taken with one (or at most, two) cameras, with focus, color saturation, and color balance indicating they were all shot at the same time.
“I say in speeches that a plausible mission of artists is to make people appreciate being alive at least a little bit. I am then asked if I know of any artists who pulled that off. I reply, 'The Beatles did.”
― Kurt Vonnegut
rickaddict
Senior Member
Posts: 6163
Joined: Mon Mar 29, 2004 7:46 am

Post by rickaddict »

My '93 Cheyenne has a maple fretboard with walnut headstock wings.

It looks like the neck being worked on has full-width inlays though. Unless that's what the poured inlays look like before they're finished.

Good eye on the tilt-back headstock Jeff R, I also noticed that.

Did anybody at the 75th Anniversary take photos at the Museum of Making Music? Wasn't there an 8-string 4005 on display that had been made in the 90's and had a mix of modern and vintage features? Did it have a regular headstock or the potatohead?
Play what you love, love what you play!
User avatar
jsod
Junior Member
Posts: 121
Joined: Sat Sep 09, 2006 4:14 am

Post by jsod »

It does apear that the majority of those necks are for Cheyennes (ci's). Good eye, Jeff T.!
User avatar
rikk
Intermediate Member
Posts: 1414
Joined: Wed Oct 12, 2005 3:04 pm

Post by rikk »

OK, pure speculation, but have to date photos often at work. If someone gave me this photo and said to date it here is what I'd say.
1. His shirt looks about a size or so too big. That style started in the early 90's. Note how long the sleeves go.
2.He looks to be in his 40's or 50's with a pony tail. There were not a lot of people that age with pony tails in 1973? Again his age and hair style would put it in the 90's or 00's.
3. Photo quality is hard to date. It does not have a 70's look. Could be 80's-00's.
4. Evidence in photos. The only item in the photo that looks mass-produced is the swinging light. I'm not an expert on swinging lights but by the way it looks I'd say 80's-00s.

And yes, I have too much time on my hands;-)
User avatar
johnallg
Rick-a-holic
Posts: 17688
Joined: Wed Apr 05, 2006 12:13 pm

Post by johnallg »

Jeff T. - I already looked at my picture of that 4005 8-string at the MOMI and it is a potatohead bass.

Image
dale_fortune
Intermediate Member
Posts: 1241
Joined: Sat Oct 30, 2004 6:00 am

Post by dale_fortune »

What ever year this may be, we did have 3 guys in the wood shop in the early 70's that had pony tails just like this happy fellow.
User avatar
walker
Advanced Member
Posts: 2908
Joined: Mon Apr 24, 2006 9:03 am
Contact:

Post by walker »

Gentlemen - about the issue of the date of the Rittor book picture - through digital photo manipulation, I have managed to confirm the approximate age of this photo. First, I noticed a possible point of detail in the upper right hand corner, specifically on the black looking piece of equipment, so I enlarged that area and sharpened it slightly:

Image

and again; notice detail starting to take shape on the lower white-hued area:

Image

more sharpening and further enlarging is bringing out more detail:

Image

repeat the process one more time, and...

Image

ba-BAMM!!! A sticker for Pearl Jam's 2nd album 'vs' which wasn't released until 1993!

So those who guessed '90's are correct. Congratulations, Junior Sleuths!



Image
User avatar
jps
RRF Consultant
Posts: 37512
Joined: Wed Feb 12, 2003 6:00 am

Post by jps »

The neck in the Rittor '(b)mook' has full width inlays for sure.

Image

I think this may be a '90s photo due to the number of maple fingerboard necks in the background, most likely for 4004 Cheyennes. If not for those I would say '70s as the rest of the image has a vintage look to it.

So back to the original question, has anyone seen an 8 string bass with a standard 4000 series headstock with large walnut wings that sports FW inlays?
User avatar
jps
RRF Consultant
Posts: 37512
Joined: Wed Feb 12, 2003 6:00 am

Post by jps »

Image

Yeah, Right on Mark! Image

Image
dale_fortune
Intermediate Member
Posts: 1241
Joined: Sat Oct 30, 2004 6:00 am

Post by dale_fortune »

You are good Mark
User avatar
jingle_jangle
RRF Moderator
Posts: 22679
Joined: Wed Dec 22, 2004 6:00 am
Contact:

Post by jingle_jangle »

...and I thought it was a dataplate label!

But...were we guessing? I do have the book right in front of me...
“I say in speeches that a plausible mission of artists is to make people appreciate being alive at least a little bit. I am then asked if I know of any artists who pulled that off. I reply, 'The Beatles did.”
― Kurt Vonnegut
User avatar
ilan
RRF Consultant
Posts: 2903
Joined: Thu Jun 13, 2002 7:00 pm

Post by ilan »

"Wasn't there an 8-string 4005 on display that had been made in the 90's and had a mix of modern and vintage features? Did it have a regular headstock or the potatohead?"

That's a reverse potato head. The octave strings are on top. (Either direction looks a bit ridiculous to me but that's just my humble opinion, I'm sure some consider them a work of art).

BTW, the maple-board necks in the background in the Rittor book photo have baby headstocks.
"A Noble Instrument Must Be Nobly Regarded"
User avatar
jps
RRF Consultant
Posts: 37512
Joined: Wed Feb 12, 2003 6:00 am

Post by jps »

Image

Not all of them.
User avatar
cheyenne
Veteran RRF member
Posts: 6263
Joined: Fri Feb 16, 2001 11:39 am

Post by cheyenne »

Maybe this is the rare, "secret" room at Rickenbacker where employees can build whatever they want too for free?

Image
"Knowledge is Power"
Post Reply

Return to “Rickenbacker Basses: by Joey Vasco & Tony Cabibe”