Rick with a wide neck

Vintage, Modern, V & C Series, Signature & Special Editions

Moderators: rickenbrother, ajish4

User avatar
admin
Site Admin
Posts: 15128
Joined: Wed Jul 05, 2000 5:00 am
Contact:

Re: Rick with a wide neck

Post by admin »

David: Is the other side of eternity near a bridge too far or this side of finality. :)

Perhaps you could give us some sense of where the other side of eternity is, then a member who lives there could invite you in to try out a Rickenbacker or two.

When choosing Rickenbacker I am betting that clarity will help. If you live in New Brunswick I will help.
Life, as with music, often requires one to let go of the melody and listen to the rhythm

Please join the Official RickResource Forum Facebook Page https://www.facebook.com/groups/379271585440277
Braineater
New member
Posts: 15
Joined: Sat Nov 10, 2007 1:22 pm

Re: Rick with a wide neck

Post by Braineater »

Any differences between a 620 and a 660?
660 has got a wider neck than a 620 and it is equipped with toasters pick ups.
Right?
Thank you!
JakeK
RRF Consultant
Posts: 5757
Joined: Sun Nov 25, 2007 9:08 pm

Re: Rick with a wide neck

Post by JakeK »

You got the basic jist of it. The 620 also has white TRC and pickguards and short fingerboard inlays, while the 660 has gold and full-length fingerboard inlays.
User avatar
jps
RRF Consultant
Posts: 37498
Joined: Wed Feb 12, 2003 6:00 am

Re: Rick with a wide neck

Post by jps »

Don't forget the checker binding on a 660. There is also the vintage headstock shape, trapeze tailpiece, nicer wood, vintage style tuning keys...basically the 660 is a vintage style instrument except with the wider fingerboard.
User avatar
ric330
Intermediate Member
Posts: 752
Joined: Fri Aug 11, 2006 3:58 pm

Re: Rick with a wide neck

Post by ric330 »

I'm a Big guy 6'2" 220 lbs. and I've played Teles most my life. I've got some big hands but the 360 6 was the ticket for me....
You really should try to find a dealer somewhere near you so you can try a few Ricks to see if the Nut width is actually an issue.
If you were playing fingerstyle solely it could be a benefit but just give a few Ricks a try you may surprise yourself.
If it is an issue then surely checkout some 660's and 650's. Do a forum search and you'll probably find some sweet pictures of the 600 series guitars is many posts.
They are out there and pack some wonderful tones.

Best of luck and I hope you find a Rickenbacker guitar that inspires you.
I rarely play a Tele since I bought the 360.
...went in to buy a 52' Tele and walked out with a 360 Jetglo...
rickenmetal
Member
Posts: 262
Joined: Tue Dec 18, 2007 7:47 am

Re: Rick with a wide neck

Post by rickenmetal »

I don't see why people are posting about ukuleles and banjos, this is more about string spacing that the actual neck, and the problems are basically on the first 5 frets (very tight string spacing). I find it somewhat hard myself, except for power chords there, which is easier, and I don't have big hands nor am I very tall.
User avatar
jimk
RRF Consultant
Posts: 5355
Joined: Thu Jan 25, 2007 7:27 am
Contact:

Re: Rick with a wide neck

Post by jimk »

Guilty, Ivan. I made that comment by way of illustration; banjos, mandolins etc. all have skinny necks, as do some Rickenbacker models. Yet musicians with large hands and thick fingers manage to make good music with them. The point I tried to make was that sloppy technique is going to hamper your playing and a skinny neck is going to show that up most obviously in my teaching experience. The moral of the story: play with curled fingers and you will play cleanly no matter the dimensions of the neck.

JimK
rickenmetal
Member
Posts: 262
Joined: Tue Dec 18, 2007 7:47 am

Re: Rick with a wide neck

Post by rickenmetal »

I still don't see how you can compare a mandolin with a Rick, the neck must be twice as wide, and a ukulele has very wide string spacing, more than a classical guitar I think. I would say that even if the bridge spacing would be a little wider you could play a lot faster because even the picking is somewhat weird when the strings are so close together. Although I agree with the thing about having the fingers curled. Can you do full bends on the 3rd fret G string?
User avatar
jimk
RRF Consultant
Posts: 5355
Joined: Thu Jan 25, 2007 7:27 am
Contact:

Re: Rick with a wide neck

Post by jimk »

rickenmetal wrote:...Can you do full bends on the 3rd fret G string?
I don't know yet. I'll have to wait and see if I can when my Ric arrives. But having said that, I think based on my past experience, I'd be more likely to bend the B strings. I almost always play in a sort of Piedmont fingerpicking style, and have a tendency to bend the B string on my acoustic 6 string. Bending the G strings on a 12 string guitar at the third fret might be kind of interesting. I'll have to give it a try.

JimK
User avatar
goofyfoot
Intermediate Member
Posts: 976
Joined: Sun Sep 30, 2007 8:31 am

Re: Rick with a wide neck

Post by goofyfoot »

admin wrote:David: Is the other side of eternity near a bridge too far or this side of finality. :)

Perhaps you could give us some sense of where the other side of eternity is, then a member who lives there could invite you in to try out a Rickenbacker or two.

When choosing Rickenbacker I am betting that clarity will help. If you live in New Brunswick I will help.
Well, Peter, if "the other side of eternity" could be plotted on a Cartesian plane, I still wouldn't know the coordinates. All I do know is it surrounds me and I'm in it. When I run into Buddy, Jimi, John, and/or Bob, they'll be able to advise me accordingly. Now, if this isn't stream-of-consciousness, I don't know what is, eh?

Late,

Image
Play on, pick often, jam with any Rickenbacker, and prosper.
Post Reply

Return to “Rickenbacker Guitars: by John Simmons”