Close call with the '68 4001 MG

Vintage, Modern, V & C series, Fretless, Signature & Special Editions

Moderators: rickenbrother, ajish4

User avatar
walker
Advanced Member
Posts: 2908
Joined: Mon Apr 24, 2006 9:03 am
Contact:

Close call with the '68 4001 MG

Post by walker »

So I was getting all geared up to do some recording with my 1968 4001 MG when the ultimate guitarist's nightmare happened:

My guitar strap slipped off the bottom end strap pin and the bass went crashing to the hardwood floor.

I caught the bass neck with my leg so it didn't completely slam against the floor, but needless to say, there was much dismay and loud expletives in the Walker household at that moment. I was overcome by anger, disbelief, and shock as I picked up the bass to inspect the damage. The strings were still taut - good sign. They rang out a true E-A-D-G; still in tune! Another good sign. I looked over the whole bass head-to-toe (heel... whatever) and there was NO new marked damage. VERY luckily for me, when the bass dropped, it landed on the jack of the guitar cord and that's where the impact was received. The cable was mangled and cut on both sides, but it still works! Gotta love Monster Cables!

Lesson learned: Use strap locks! Even with the original '68 strap pins, strap locks cradle the pins without likelihood of slipping out. Granted, if I was doing the Steve Vai over-the-shoulder-guitar-toss trick, I'd use the full set of strap lock pins. Then again, I sure as fxxx wouldn't be doing stunts like that with my '68. But I digress...

1. Use strap locks, and

2. use my other '79 4001 beater gig bass for sound checks. In a recording situation, there's always a cable to trip over or a stand to run into - OR a ****** guitar strap that gives out on you. So from now on, no vintage gear on the studio floor (literally) until the tape is ready to roll.

Image

Image

Image

Every night I wake up screaming.
rickaddict
Senior Member
Posts: 6163
Joined: Mon Mar 29, 2004 7:46 am

Re: Close call with the '68 4001 MG

Post by rickaddict »

Good to hear that the cable took the hit, Mark. Sounds like a heart-stopping moment.

One time when I was 15 and playing a gig at a Frat party my (non-Rick) bass popped off it's strap and out of my hands like a bar of soap in the shower. I kept playing and sat on the floor to finish the song. It was scary, embarrassing and traumatic. Since then I've been a Schaller Strap Lock guy and the problem has never repeated itself.
User avatar
berth
RRF Consultant
Posts: 1723
Joined: Tue Jun 06, 2006 7:06 am
Contact:

Re: Close call with the '68 4001 MG

Post by berth »

walker wrote:I looked over the whole bass head-to-toe (heel... whatever) and there was NO new marked damage.
I think I need more proof of this Mark! (And thank god the bass survived!)
User avatar
atomic_punk
Senior Member
Posts: 5093
Joined: Wed Sep 17, 2003 5:00 am
Contact:

Re: Close call with the '68 4001 MG

Post by atomic_punk »

Strap locks are MANDATORY on all my basses....but all I do is put a big washer on when I put the strap pegs back in and it keeps the strap ON the bass. It makes it hard to take the strap off, but I know it won't come off on stage either.
rickfan60
Senior Member
Posts: 5395
Joined: Sun Apr 11, 2004 5:00 am

Re: Close call with the '68 4001 MG

Post by rickfan60 »

atomic_punk wrote:Strap locks are MANDATORY on all my basses....but all I do is put a big washer on when I put the strap pegs back in and it keeps the strap ON the bass. It makes it hard to take the strap off, but I know it won't come off on stage either.

My brother used to do the washer trick with one of his guitars. It works great. Unless the strap itself breaks, your guitar is not going to fall off.

Close one Mark. I am glad the old girl survived. Get yourself a set of modern RIC strap buttons. It is a quick, easy, and reversible mod. Put a little water on the treads of the strap button before you screw it in. The wood will swell up and hold it tight. Apparently that is how the factory does it.
User avatar
jdogric12
Rick-a-holic
Posts: 10925
Joined: Thu Dec 29, 2005 6:00 am

Re: Close call with the '68 4001 MG

Post by jdogric12 »

walker wrote:
Every night I wake up screaming.

Simpsons quote, right? Skinner reminiscing about Da Nang?
User avatar
walker
Advanced Member
Posts: 2908
Joined: Mon Apr 24, 2006 9:03 am
Contact:

Re: Close call with the '68 4001 MG

Post by walker »

HA! That must be where I got it from. I have seen that episode.

"Every night I wake up screaming... SO! Let's get you to your new classroom!"

Another Skinner fav:

"Up yours, children!"
User avatar
ram
Senior Member
Posts: 3743
Joined: Sun Jun 25, 2006 2:55 pm

Re: Close call with the '68 4001 MG

Post by ram »

Mark, glad to hear the '68 survived the landing...

I had a near death experience with my 4001 several moons ago. Playing live the strap popped off and downward it went - face down! Somehow I caught the head stock and the body bounced on my right on my right foot. I thought for sure that the switch or something had gotten whacked real good... but through some act of providence all was OK. Yep strap locks after that typ of happening are mandatory!!!
User avatar
walker
Advanced Member
Posts: 2908
Joined: Mon Apr 24, 2006 9:03 am
Contact:

Re: Close call with the '68 4001 MG

Post by walker »

I do have the Schaller strap locks on most all my basses except for the '64 & '68. I'm reluctant to remove the original RIC strap pins. They're a ***** to get out, and I don't want to cause any extra stress on the threads inside the body. Aren't the threads on the Schaller strap lock pins different? It's been so long since I put them in, I can't remember.
User avatar
ram
Senior Member
Posts: 3743
Joined: Sun Jun 25, 2006 2:55 pm

Re: Close call with the '68 4001 MG

Post by ram »

Seems to me there was a thread or two about this a while back - might want to search 'strap locks'...

yep

Re: Strap locks
The threads for all rick strap pins/locks is 10/24 and is a machine screw type thread not a wood screw type. If you can't get the proprietary ...
gshadoan
Veteran RRF member
Posts: 368
Joined: Mon Sep 25, 2000 11:23 pm

Re: Close call with the '68 4001 MG

Post by gshadoan »

I like Zakk Wildes solution. A CHAIN SCREWED INTO THE GUITAR :mrgreen:
That thing will/should never come loose, but it is Zakk I'm talking about :lol:
User avatar
marc61
Senior Member
Posts: 6443
Joined: Sat Aug 09, 2003 9:31 am
Contact:

Re: Close call with the '68 4001 MG

Post by marc61 »

I guess when we have collector's basses we don't like to change anything. My thing is I keep the strap on the bass so the hole doesn't widen from constantly attaching it. Hardly secure, and doesn't help if you're constantly dancing and doing dives off the stage while gigging but, for myself it suffices.

Strap locks slip and break too over time.
User avatar
wints
Veteran RRF member
Posts: 6481
Joined: Sun Oct 07, 2001 11:21 am

Re: Close call with the '68 4001 MG

Post by wints »

A lucky escape Mark!

The odds of that happening were pretty long, but in this case, thankfully, they came up!
User avatar
ram
Senior Member
Posts: 3743
Joined: Sun Jun 25, 2006 2:55 pm

Re: Close call with the '68 4001 MG

Post by ram »

Mark - Just had a though (yeah, I know - scary) - anyhow there are the strap based locks - similar to the washer effect - Jim Dunlop LokStrap strap retainers. They are pretty inexpensive but might be worth a try ifins you are reluctant to altering your ax.
User avatar
beatlefreak
Senior Member
Posts: 6160
Joined: Wed Jun 14, 2006 5:45 am
Contact:

Re: Close call with the '68 4001 MG

Post by beatlefreak »

walker wrote:1. Use strap locks, and

2. use my other '79 4001 beater gig bass for sound checks. In a recording situation, there's always a cable to trip over or a stand to run into - OR a ****** guitar strap that gives out on you. So from now on, no vintage gear on the studio floor (literally) until the tape is ready to roll.
I'd like to add a few precautions to this:

3. Unplug your guitar/bass when it's sitting on a stand. This keeps the instrument from being accidently flung across the stage or room by someone's foot snagging the cord.

4. Make sure your strap is behind the stand when your instrument is sitting on it. (Same reason as number 3)

5. Except for those short breaks during recording, playing live or pacticing at home, keep your instrument in it's case. Stands are temporary use only. Too many accidents can happen when a guitar or bass is siting out.
Post Reply

Return to “Rickenbacker Basses: by Joey Vasco & Tony Cabibe”