Ric pickups?

Vintage, Modern, V & C series, Fretless, Signature & Special Editions

Moderators: rickenbrother, ajish4

ken_james
Veteran RRF member
Posts: 940
Joined: Sun Jul 15, 2001 11:57 am
Contact:

Post by ken_james »

For some reason the leads don't look right, I thought they used a grey coating on the wires?
jwr2

Post by jwr2 »

4.8k omns ... it should be 6k or higher ... ric pickups have sheilded wiring ... like an instrument cable ... also the buttons look a little too big ....

What model does it come from ... a Rickenfaker?
rickcrazy
RRF Consultant
Posts: 3578
Joined: Thu May 30, 2002 4:11 am

Post by rickcrazy »

Like I said, let's assume the pickup is totally stock and the seller measured it correctly. Forget the magnet, it doesn't affect ohmage; forget the output leads; forget the polepieces, which I'm sure are original; forget even the black electrician's tape, which appears to be non-original, which could mean either the pickup was rewound or the original tape gave up the ghost. Assume the thing has never been tampered with. What's the only Rick bass model it could have come from? Don't disappoint me, guys.
Image
A Rickenbacker bass is much like the Jaguar E car - perennially ultra-fashionable.
ojobob2
Veteran RRF member
Posts: 1046
Joined: Tue Dec 31, 2002 5:31 am
Contact:

Post by ojobob2 »

4000 DOH! Image
The email address shown is down, you can email me at [email protected]
rickcrazy
RRF Consultant
Posts: 3578
Joined: Thu May 30, 2002 4:11 am

Post by rickcrazy »

BINGO!
A Rickenbacker bass is much like the Jaguar E car - perennially ultra-fashionable.
rictified
Senior Member
Posts: 8040
Joined: Sat Apr 19, 2003 5:00 am

Post by rictified »

Assuming that is true, why would Ric put a very trebley sounding pickup on a single pickup bass? I would think it would be the same as their 4001 pickups or even have more windings for more bottom.
User avatar
johnhall
RIC
Posts: 3926
Joined: Tue Sep 26, 2000 11:17 am
Contact:

Post by johnhall »

The coil assembly for a 4000 was the exact same part as a 4001. Same part number, same stock number, same production runs.

This pickup has been twiddled with and looks to have some serious corrosion issues. It's probably shorted or unwound somewhat.
rickcrazy
RRF Consultant
Posts: 3578
Joined: Thu May 30, 2002 4:11 am

Post by rickcrazy »

On a couple of occasions, I read somewhere (maybe it was in this Froum) that typically the ohm rating of the single pickup on the 4000 Model was approx. 4.0 K. Maybe what I read was erroneous information. However, since it is a fact that the 4000 bass never came with the treble-pass capacitor, I believe it stands to reason to think that a clearer-sounding high-gain pickup such as one wound to only 4.0 K would be a natural choice for the 4000 Model. I hope I've made my point.
A Rickenbacker bass is much like the Jaguar E car - perennially ultra-fashionable.
rictified
Senior Member
Posts: 8040
Joined: Sat Apr 19, 2003 5:00 am

Post by rictified »

Just my humble opinion, (and I'm really not trying to P anyone off here) but I think we can trust The owner of Rickenbacker to give out correct information on his own products.
ojobob2
Veteran RRF member
Posts: 1046
Joined: Tue Dec 31, 2002 5:31 am
Contact:

Post by ojobob2 »

Ive tried a 4000, it sounded thick, like my 73's treble pickup ( that im getting rid of) with its cap removed. Perhaps even thicker than that.

Why would any maker would put a pickup as thin as 4k in a single pickup bass? It would be horrible, i certainly wouldnt want it. The old toasters are 6/7k right? they are low output. a 4k high gain would be awful
The email address shown is down, you can email me at [email protected]
rickcrazy
RRF Consultant
Posts: 3578
Joined: Thu May 30, 2002 4:11 am

Post by rickcrazy »

Okay, I stand corrected. I believe I've read erroneous information.
As for a 4.0 K treble high-gain not being that hot, may I remind you that it is powered by a very strong magnet, not to mention the fact that on the 4000 Model there is no treble-pass capacitor to somewhat 'tame' the output of the pickup. Output of the old toaster pickups is not specially high because the (six) magnets on them are not too strong. Plus, the coil is not very close to the magnets, which makes for a medium output pickup.
A Rickenbacker bass is much like the Jaguar E car - perennially ultra-fashionable.
User avatar
weemac
Veteran RRF member
Posts: 2735
Joined: Tue Mar 26, 2002 1:28 am

Post by weemac »

I had the 4.0K 4000, Perhaps it had been rewound, Never the less it sounded great!
I confused Faraday's cage, with Schrodinger's cat box....
rickcrazy
RRF Consultant
Posts: 3578
Joined: Thu May 30, 2002 4:11 am

Post by rickcrazy »

Hey, Eden. Thanks.
A Rickenbacker bass is much like the Jaguar E car - perennially ultra-fashionable.
Post Reply

Return to “Rickenbacker Basses: by Joey Vasco & Tony Cabibe”