why is the 4001 C64 in fg going for a lot more...

Vintage, Modern, V & C series, Fretless, Signature & Special Editions

Moderators: rickenbrother, ajish4

Post Reply
barginkov
New member
Posts: 46
Joined: Sun Mar 23, 2008 1:05 am

why is the 4001 C64 in fg going for a lot more...

Post by barginkov »

than the Jetglo 4001 C64 , on ebay one fg just sold for over 3000, i never see the jetglo 4001 c64 go for anywhere that high. is it more desirable ?
User avatar
tennis_nick
Intermediate Member
Posts: 1476
Joined: Mon Dec 18, 2006 9:56 am

Re: why is the 4001 C64 in fg going for a lot more...

Post by tennis_nick »

barginkov wrote:than the Jetglo 4001 C64 , on ebay one fg just sold for over 3000, i never see the jetglo 4001 c64 go for anywhere that high. is it more desirable ?
McCartney never had a Jetglo. may count for something.
barginkov
New member
Posts: 46
Joined: Sun Mar 23, 2008 1:05 am

Re: why is the 4001 C64 in fg going for a lot more...

Post by barginkov »

does anyone know if they used different woods
brycycle
Advanced Member
Posts: 1774
Joined: Tue Aug 15, 2006 2:03 pm

Re: why is the 4001 C64 in fg going for a lot more...

Post by brycycle »

barginkov wrote:does anyone know if they used different woods
from my understanding, the FG and JG would be identical woods, but the FG would exhibit a more desirable aesthetic in the wood grain which would make it more suitable for a translucent finish - or transparent in the case of MG.

for instance, the C64S is to be only avail. in MG - but on occasion the wood grain doesn't pass the aesthetic test and is sprayed JG. Apparently it isn't known until production is well underway if this will be the case, or not...
User avatar
2112
Member
Posts: 387
Joined: Mon Dec 24, 2007 3:02 am

Re: why is the 4001 C64 in fg going for a lot more...

Post by 2112 »

brycycle wrote:
barginkov wrote:does anyone know if they used different woods
from my understanding, the FG and JG would be identical woods, but the FG would exhibit a more desirable aesthetic in the wood grain which would make it more suitable for a translucent finish - or transparent in the case of MG.

for instance, the C64S is to be only avail. in MG - but on occasion the wood grain doesn't pass the aesthetic test and is sprayed JG. Apparently it isn't known until production is well underway if this will be the case, or not...


Using this logic, the JG version would be less common and therefore more "rare" for this model.
No?
rickaddict
Senior Member
Posts: 6163
Joined: Mon Mar 29, 2004 7:46 am

Re: why is the 4001 C64 in fg going for a lot more...

Post by rickaddict »

barginkov wrote:than the Jetglo 4001 C64 , on ebay one fg just sold for over 3000, i never see the jetglo 4001 c64 go for anywhere that high. is it more desirable ?
I'd say that this is just a statistical anomaly. Its a great bass, don't get me wrong...but this is the highest price I've ever seen for a used 4001C64.

There aren't very many C64's on ebay. If a bidder sees one that he/she really wants, then that bidder might shoot for the moon. In this case this bidder (and at least one other) really wanted a nice 4001C64FG.

I've seen a 4001V63JG sell for a crazy price a few years ago. It all just boils down to who's in the market and how much they want the item.

I wouldn't necessarily say that JG is worth any more or less than FG.
User avatar
tennis_nick
Intermediate Member
Posts: 1476
Joined: Mon Dec 18, 2006 9:56 am

Re: why is the 4001 C64 in fg going for a lot more...

Post by tennis_nick »

2112 wrote:
brycycle wrote:
barginkov wrote:does anyone know if they used different woods
from my understanding, the FG and JG would be identical woods, but the FG would exhibit a more desirable aesthetic in the wood grain which would make it more suitable for a translucent finish - or transparent in the case of MG.

for instance, the C64S is to be only avail. in MG - but on occasion the wood grain doesn't pass the aesthetic test and is sprayed JG. Apparently it isn't known until production is well underway if this will be the case, or not...


Using this logic, the JG version would be less common and therefore more "rare" for this model.
No?
Hence the great debate. Rarity vs. Compromise.
brycycle
Advanced Member
Posts: 1774
Joined: Tue Aug 15, 2006 2:03 pm

Re: why is the 4001 C64 in fg going for a lot more...

Post by brycycle »

tennis_nick wrote: Hence the great debate. Rarity vs. Compromise.
exactly what i was pondering in the decision to keep my JG C64S:

viewtopic.php?f=9&t=381195
User avatar
tennis_nick
Intermediate Member
Posts: 1476
Joined: Mon Dec 18, 2006 9:56 am

Re: why is the 4001 C64 in fg going for a lot more...

Post by tennis_nick »

brycycle wrote:
tennis_nick wrote: Hence the great debate. Rarity vs. Compromise.
exactly what i was pondering in the decision to keep my JG C64S:

viewtopic.php?f=9&t=381195
and exactly the topic I was referring too!

Personally I think they look fantastic, I wouldn't say no to one, and wouldn't feel bad that I got one with aesthetically displeasing wood under the aesthetically PLEASING jetglo finish
User avatar
wints
Veteran RRF member
Posts: 6482
Joined: Sun Oct 07, 2001 11:21 am

Re: why is the 4001 C64 in fg going for a lot more...

Post by wints »

I think the bottom line is that FG is the classic Ric colour, and on a classic bass is always much more coveted.

JG is the opposite, even with a low production run, unless we're talking Shadow, Blackstar, or Phlemmy..
rickaddict
Senior Member
Posts: 6163
Joined: Mon Mar 29, 2004 7:46 am

Re: why is the 4001 C64 in fg going for a lot more...

Post by rickaddict »

wints wrote:I think the bottom line is that FG is the classic Ric colour, and on a classic bass is always much more coveted.

JG is the opposite, even with a low production run, unless we're talking Shadow, Blackstar, or Phlemmy..
I dunno Andy, I'd agree that more people want a Fireglo C64/V63 than a JG C64/V63, but then you have the relative rarity of a JG. Some people want to be different.

Some people would much prefer a Jetglo, a Sea Green, a Turquoise, a White, or a Red V63 to a Fireglo. And there is a more limited supply of those colors. Well actually, all White ones are refins and I've never seen a Red one but you get my point.

My point is...the final selling price depends on the demand in the marketplace relative to the supply.

Are FG V63's more coveted than Sea Green V63's?

8)
rickaddict
Senior Member
Posts: 6163
Joined: Mon Mar 29, 2004 7:46 am

Re: why is the 4001 C64 in fg going for a lot more...

Post by rickaddict »

wints wrote:...unless we're talking Shadow, Blackstar, or Phlemmy..
:lol:
User avatar
wints
Veteran RRF member
Posts: 6482
Joined: Sun Oct 07, 2001 11:21 am

Re: why is the 4001 C64 in fg going for a lot more...

Post by wints »

I think JG comes across as a standard Ric colour in most minds Jeff, and as such, it's not in the true COY/SE range.

In the C instance here, it is rare, but that doesn't seem to translate into perceived want and value, similarly, the V63's. Unless you really want a JG, they do seem to have the lowest resale.
rickaddict
Senior Member
Posts: 6163
Joined: Mon Mar 29, 2004 7:46 am

Re: why is the 4001 C64 in fg going for a lot more...

Post by rickaddict »

wints wrote: Unless you really want a JG, they do seem to have the lowest resale.
Ebay is kind of a **** shoot. You never know which Rick-crazed bidder is in the market and what he/she might want at the time. I think it was a little over a year ago I saw a nice V63JG (a later one) sell for $2800. Then, a few months later I bought a nice '92 V63FG for $1800. Based on market conditions at that time, I'd be tempted to say that JG was a more valuable color than FG.

When two or more bidders in the market really want something, we see price spikes that might not necessarily reflect what we think the market value should be.

Isn't it fun playing Point-Counterpoint, Andy? :wink:

I know...I'm a jerk!

:twisted:

But really, both the 4001C64JG on ebay right now for $2399.00 and the 4001C64FG that just sold for a little over $3000 are both very desirable Rick basses. And on any other week, I would think $2399.00 would be on the high side for a used JG or FG example.

Its just that this time, more than one Rick-crazed bidder really wanted a 4001C64FG.

Thats my story any way, and I'm stickin' to it!

8)
User avatar
wints
Veteran RRF member
Posts: 6482
Joined: Sun Oct 07, 2001 11:21 am

Re: why is the 4001 C64 in fg going for a lot more...

Post by wints »

:)
Post Reply

Return to “Rickenbacker Basses: by Joey Vasco & Tony Cabibe”