Tuning problems with my 366/12

Setup, repair and restoration of Rickenbacker Instruments

Moderator: jingle_jangle

Post Reply
User avatar
gibsonlp
Technical Admin
Posts: 1734
Joined: Mon Sep 05, 2005 10:40 pm
Contact:

Tuning problems with my 366/12

Post by gibsonlp »

Hi guys.
I am having some issues with my 366/12 tuning.

I purchased a 12 saddle bridge (don't worry, I kept the original one in the case) in order to ease the tuning, however - it doesn't help... :|

The problem is more serious with the "thicker" strings, the low "E" string is ~30 cents too high when comparing the open note to the 12th fret E.
The saddle goes ALL THE WAY BACK. In order to take it more back (and maybe fix this) I'll need to take out the entire bridge and remove the spring to allow the saddle to go back more.

The octave E string is fine and the saddle is pretty much in the center towards the back (it has some more room to go back if I need, but there is no need for that).

What could cause such a problem? how can I fix this? this is really annoying...
So long and thanks for all the fish!
User avatar
deaconblues
RRF Consultant
Posts: 2390
Joined: Tue Feb 06, 2007 5:14 pm

Re: Tuning problems with my 366/12

Post by deaconblues »

The modern bridge plates can be shifted backwards slightly to help with this:
00829.jpg
Maybe you could try one of these, they're available at the Ric Boutique.
User avatar
gibsonlp
Technical Admin
Posts: 1734
Joined: Mon Sep 05, 2005 10:40 pm
Contact:

Re: Tuning problems with my 366/12

Post by gibsonlp »

Thanks, I have such a plate that came with the new bridge.

My question is - how can this happen? I remember that JH said once that the 12 saddle bridge is not needed as the required length for the octave string is the same (or something like that)
How come my octave E is "shorter" than my low E, yet - the low E is higher on the 12th fret?

Thanks again.
So long and thanks for all the fish!
User avatar
admin
Site Admin
Posts: 15135
Joined: Wed Jul 05, 2000 5:00 am
Contact:

Re: Tuning problems with my 366/12

Post by admin »

Gil: Remove the spring. :) It is the most straightforward fix.

Excessive humidity is also a variable this time of year. Also, the slots can be lenghtened in the bridge plate as well.

But before you go the route of truss rod adjustment, nut changes, slot lenthening and the like do yourself a favour and remove the spring.
Life, as with music, often requires one to let go of the melody and listen to the rhythm

Please join the Official RickResource Forum Facebook Page https://www.facebook.com/groups/379271585440277
User avatar
jps
RRF Consultant
Posts: 37503
Joined: Wed Feb 12, 2003 6:00 am

Re: Tuning problems with my 366/12

Post by jps »

admin wrote:Excessive humidity is also a variable this time of year.
In Israel? :mrgreen:
User avatar
admin
Site Admin
Posts: 15135
Joined: Wed Jul 05, 2000 5:00 am
Contact:

Re: Tuning problems with my 366/12

Post by admin »

Jeff: Well I was considering the few miles of coastline that Israel has along the Mediterranean Sea. :)
Life, as with music, often requires one to let go of the melody and listen to the rhythm

Please join the Official RickResource Forum Facebook Page https://www.facebook.com/groups/379271585440277
User avatar
jps
RRF Consultant
Posts: 37503
Joined: Wed Feb 12, 2003 6:00 am

Re: Tuning problems with my 366/12

Post by jps »

If it's anything like when I lived in L.A., me being only a couple miles from the Pacific, Gil has nothing to sweat about! 8)
User avatar
gibsonlp
Technical Admin
Posts: 1734
Joined: Mon Sep 05, 2005 10:40 pm
Contact:

Re: Tuning problems with my 366/12

Post by gibsonlp »

Actually, with 70% humidity, it is pretty humid, no?
So long and thanks for all the fish!
User avatar
admin
Site Admin
Posts: 15135
Joined: Wed Jul 05, 2000 5:00 am
Contact:

Re: Tuning problems with my 366/12

Post by admin »

Gil: I would say that 70% is certainly humid enough to make a difference.
Life, as with music, often requires one to let go of the melody and listen to the rhythm

Please join the Official RickResource Forum Facebook Page https://www.facebook.com/groups/379271585440277
User avatar
jps
RRF Consultant
Posts: 37503
Joined: Wed Feb 12, 2003 6:00 am

Re: Tuning problems with my 366/12

Post by jps »

gibsonlp wrote:Actually, with 70% humidity, it is pretty humid, no?
That sounds more like midwest USA than Tel Aviv! :shock:
User avatar
gibsonlp
Technical Admin
Posts: 1734
Joined: Mon Sep 05, 2005 10:40 pm
Contact:

Re: Tuning problems with my 366/12

Post by gibsonlp »

Tel Aviv is now at 69%...
I live less than a mile from the shore, and b.t.w - if you'd look at the map you'll see that a large portion of Israel is near the edge of the mediterranean sea, as well as some touching the red sea and the dead sea...
So long and thanks for all the fish!
User avatar
admin
Site Admin
Posts: 15135
Joined: Wed Jul 05, 2000 5:00 am
Contact:

Re: Tuning problems with my 366/12

Post by admin »

Gil: I am betting that your intonation will improve once the spring is out of the way. :)
Life, as with music, often requires one to let go of the melody and listen to the rhythm

Please join the Official RickResource Forum Facebook Page https://www.facebook.com/groups/379271585440277
User avatar
gibsonlp
Technical Admin
Posts: 1734
Joined: Mon Sep 05, 2005 10:40 pm
Contact:

Re: Tuning problems with my 366/12

Post by gibsonlp »

Peter: sorry, forgot to answer...
I am sure too, I need to take out the entire bridge, I hate doing that as it means loosening the tension off the neck... :(
It will have to wait until the next strings replacement (probably within a few months, I don't play the 12 as much as I would like to...)
So long and thanks for all the fish!
User avatar
grazioso
Intermediate Member
Posts: 1076
Joined: Mon Dec 03, 2007 8:41 pm
Contact:

Re: Tuning problems with my 366/12

Post by grazioso »

peter is right. take the spring out until you have to change the strings, than you can move the bridge that 1/8 back and put the spring back.
dusan palka who is also known as grazioso on infamous auction web site
if you want to reach the man and expect an answer please make sure you remove this email address ([email protected]) from your spam block if you have one.
Post Reply

Return to “"Vibrola" Rickenbacker Technical Forum: By Paul Wilczynski”