Ric 4003 treble pickup

jnbass · Post by **jnbass** » Sat Feb 28, 2004 8:30 pm

It seems that some of the newer p'ups are glued or double-sided taped to the base.

At least those that I've changed to the aluminium base due to breakage.

jnbass · Post by **jnbass** » Sat Feb 28, 2004 8:36 pm

I mean the magnet is glued/taped to the base.

If going through all that trouble for alignment, why not this?

paul_yan · Post by **paul_yan** » Sun Feb 29, 2004 2:43 am

Marty,
Thanks.

Jared,
Yeah, you've just reminded me that the treble pickup magnet of my Sophie WAS glued to the baseplate. I used the word "WAS" because of this:
../10625/7203.html"#EECD9C">

jps · Post by **jps** » Sun Feb 29, 2004 5:32 am

Jared,
I assume the holes in your new aluminum baseplates are threaded for the height adjustment screws, right?

jnbass · Post by **jnbass** » Sun Feb 29, 2004 7:24 am

Jeff-

YESsongs

jps · Post by **jps** » Sun Feb 29, 2004 8:01 am

And of course the holes aren't to Close To The Edge!

rickcrazy · Post by **rickcrazy** » Sun Feb 29, 2004 8:55 am

More of that pun lunacy?

ken_james · Post by **ken_james** » Sun Feb 29, 2004 9:25 am

But they are Fragile

jnbass · Post by **jnbass** » Sun Feb 29, 2004 10:43 am

in a Roundabout way

mortivan · Post by **mortivan** » Sun Feb 29, 2004 11:17 am

Pete, it's Your Move...

jwr2 · Post by **jwr2** » Sun Feb 29, 2004 1:32 pm

So Jared ... Are you selling aluminum base plates?

jnbass · Post by **jnbass** » Sun Feb 29, 2004 8:44 pm

Those are for my RICs that have been stripped out, cracked, UPS'd, etc...

Ya need one?

jwr2 · Post by **jwr2** » Sun Feb 29, 2004 9:11 pm

It might be nice to have an extra ... for future use ...

jnbass · Post by **jnbass** » Sun Feb 29, 2004 9:47 pm

its for the Survivor.

I'll earmark a few for you on the next run.

Sorry no ALCOA deltas on these pieces, nor the blue stripe.

Will keep looking.

jps · Post by **jps** » Mon Mar 01, 2004 2:53 am

I'd like one too, Jared, as a spare for a project I am working on. Thanks.