HELP with Epiphone EJ-160 pickup

Off Topic discussion forum

Moderators: ajish4, cjj

User avatar
ken_j
RRF Consultant
Posts: 4216
Joined: Fri Jul 18, 2003 5:31 am
Contact:

Re: HELP with Epiphone EJ-160 pickup

Post by ken_j »

nukebass wrote: I always thought the pickup was used for I Feel Fine and that acoustic strings were used. I could be wrong. Thanks for the help!!
As far as I know you are correct.
GHS makes acoustic strings called "White Bronze". This may be the answer to your problem. Here is what GHS says about them:
White Bronze™

Category: Acoustic Guitar

Description:
Wound with “Alloy 52™”, these strings are magnetically active which makes them ideal for acoustic/electric applications. The material also resists corrosion to help players with high acidity and those that live in humid climates. This non-tarnishing material delivers an extra brilliant sound with a very long tone life
"The best things in life aren't things."
1OUfan
Junior Member
Posts: 173
Joined: Fri Mar 14, 2008 4:55 pm

Re: HELP with Epiphone EJ-160 pickup

Post by 1OUfan »

Wouldn't the theory about the bronze strings only apply to the wound strings? Seems like to me that the E and B (1&2) should be pleanty loud if the pickup is working properly.
Bob
User avatar
admin
Site Admin
Posts: 15124
Joined: Wed Jul 05, 2000 5:00 am
Contact:

Re: HELP with Epiphone EJ-160 pickup

Post by admin »

Bob, you are right, but having only two strings ringing out leaves a relatively empty sound. Also, this pickup is still not the best. White Bronze by GHS or the Zebra strings by DR will be a substantial improvement.
Life, as with music, often requires one to let go of the melody and listen to the rhythm

Please join the Official RickResource Forum Facebook Page https://www.facebook.com/groups/379271585440277
JakeK
RRF Consultant
Posts: 5757
Joined: Sun Nov 25, 2007 9:08 pm

Re: HELP with Epiphone EJ-160 pickup

Post by JakeK »

I've always been under the impression that one should use heavier gauge strings on an acoustic (I don't know an acoustic guitar to say what strings should be used, but I would venture to use Elix'r .012 gauge). I usually think of the J-160E primarily as an acoustic guitar.

Now, I know that the P-90 is the electric pickup for the J-160E, but do modern versions have an acoustic pickup for it?
User avatar
jingle_jangle
RRF Moderator
Posts: 22679
Joined: Wed Dec 22, 2004 6:00 am
Contact:

Re: HELP with Epiphone EJ-160 pickup

Post by jingle_jangle »

JakeK wrote:I've always been under the impression that one should use heavier gauge strings on an acoustic (I don't know an acoustic guitar to say what strings should be used, but I would venture to use Elix'r .012 gauge). I usually think of the J-160E primarily as an acoustic guitar.

Now, I know that the P-90 is the electric pickup for the J-160E, but do modern versions have an acoustic pickup for it?
Wrong impression, Jake...

Elixirs are way over rated and have become somewhat controversial. A lot of acoustic players think they kill sustain and are missing in sweeter overtones. I don't like them because they are relatively high in string tension, even in the .010 set. Elixir .012s? I couldn't imagine...it'd be like playing a cheese slicer.
User avatar
ken_j
RRF Consultant
Posts: 4216
Joined: Fri Jul 18, 2003 5:31 am
Contact:

Re: HELP with Epiphone EJ-160 pickup

Post by ken_j »

jingle_jangle wrote:... Elixir .012s? I couldn't imagine...it'd be like playing a cheese slicer.
You should try the 0.013" through 0.056" Phosphor Bronze set I play on my Larrivee! You can't beat the tone though.
JakeK wrote:...Now, I know that the P-90 is the electric pickup for the J-160E, but do modern versions have an acoustic pickup for it?
Not that I know of, just the P-90.
"The best things in life aren't things."
JakeK
RRF Consultant
Posts: 5757
Joined: Sun Nov 25, 2007 9:08 pm

Re: HELP with Epiphone EJ-160 pickup

Post by JakeK »

jingle_jangle wrote:Elixirs are way over rated and have become somewhat controversial. A lot of acoustic players think they kill sustain and are missing in sweeter overtones. I don't like them because they are relatively high in string tension, even in the .010 set. Elixir .012s? I couldn't imagine...it'd be like playing a cheese slicer.
Like OLD Pyramid .012's?
Last edited by JakeK on Thu Nov 05, 2009 5:09 pm, edited 1 time in total.
User avatar
tennis_nick
Intermediate Member
Posts: 1476
Joined: Mon Dec 18, 2006 9:56 am

Re: HELP with Epiphone EJ-160 pickup

Post by tennis_nick »

jingle_jangle wrote:Elixirs are way over rated and have become somewhat controversial. A lot of acoustic players think they kill sustain and are missing in sweeter overtones. I don't like them because they are relatively high in string tension, even in the .010 set. Elixir .012s? I couldn't imagine...it'd be like playing a cheese slicer.
Sounds like they're using polywebs and not nanowebs.

The nanowebs are better than the polys, thinner coating, more natural overtones. The polys are said to be designed to sound broken in, fresh out of the pack.
User avatar
doctorwho
Veteran RRF member
Posts: 12652
Joined: Tue Jun 11, 2002 3:28 pm

Re: HELP with Epiphone EJ-160 pickup

Post by doctorwho »

ken_j wrote:...
JakeK wrote:...Now, I know that the P-90 is the electric pickup for the J-160E, but do modern versions have an acoustic pickup for it?
Not that I know of, just the P-90.
+1
It is better, of course, to know useless things than to know nothing. - Seneca
Post Reply

Return to “The Others: by CJ Johansson”