Techniques On The 4001/3FL
Moderators: rickenbrother, ajish4
Re: Techniques On The 4001/3FL
Tony, I got to check this out:
Re: Techniques On The 4001/3FL
That was when Shari and I got the tour by Mica. 
Re: Techniques On The 4001/3FL
John, mine was an '04.
- cassius987
- Senior Member
- Posts: 4723
- Joined: Mon Aug 04, 2008 2:11 pm
Re: Techniques On The 4001/3FL
Tony, Bill Conklin makes something nearly identical to that Alembic for 1/5 the price. He calls it the MEU. I have played one in his workshop. They are quite lovely and play a lot more like an upright than an electric--his vision was just an ergonomic upright-style instrument that was easy to transport. The one I played was made of cherry wood. Check it out...
Re: Techniques On The 4001/3FL
Tony go for the NS. 
The CR4M I had was a great bass.
The CR4M I had was a great bass.
- rickenbrother
- RRF Moderator
- Posts: 13218
- Joined: Sun May 26, 2002 5:00 am
Re: Techniques On The 4001/3FL
That's weird, I get tons of mwah out of my 4001FL and 4003Fl, so much so that I sometimes use the mute to make mwah much more subtle as I did in the recording of "Georgia On My Mind".jps wrote:As I no longer own my 4003FL my comments are in reflection only. It had a unique voice different from other fretless basses I have own over the years. When I first got it I found the sound much darker with little of the typical mwah one gets from most FL basses. Custom light set of 40-55-75-95, primarily to minimize wear on the CV finish of the fingerboard.
I think the change was made in '07. My '06 has the side dots in the same place as the fretted 4003.FretlessOnly wrote:My 2008 FL has the side dots where the fret would be, and the fingerboard dots just as in a fretted bass, so I only look at the side dots. What year was your FL and when did this change? I remember a thread several months ago where someone was insisting that Rick never made a FL bass as I was describing mine, or something like that.
JETGLO should officially be renamed JETGLO ROCKS! 
Re: Techniques On The 4001/3FL
My 4003FL TUR (Feb 1997) has as many side dots as possible ...FretlessOnly wrote:Interesting. My 2008 FL has the side dots where the fret would be, and the fingerboard dots just as in a fretted bass, so I only look at the side dots. What year was your FL and when did this change? I remember a thread several months ago where someone was insisting that Rick never made a FL bass as I was describing mine, or something like that.jps wrote:
As to technique, as much as I try to just listen for intonation I do look at the side dots for reference. The reason I sold the 4003FL was due to the placement of said dots. As we all know they were placed just as if the bass were fretted, and this did not make it easy for me; that was my only real gripe with that bass, other than that I would still have it and it would be my main FL bass in use.
It is better, of course, to know useless things than to know nothing. - Seneca
- rickenbrother
- RRF Moderator
- Posts: 13218
- Joined: Sun May 26, 2002 5:00 am
Re: Techniques On The 4001/3FL
That's too many dots for me, Gary!!
I remember playing that bass at one of the mini-con-jams, getting completely lost by the amount of side dots were on that neck!

I remember playing that bass at one of the mini-con-jams, getting completely lost by the amount of side dots were on that neck!
JETGLO should officially be renamed JETGLO ROCKS! 
- hieronymous
- Intermediate Member
- Posts: 837
- Joined: Fri Feb 11, 2005 10:46 pm
- Contact:
Re: Techniques On The 4001/3FL
I'm kind of bummed - I just lost out on a fretless 1977 4001 in Autumnglo - cousin to my fretted '76. I was looking forward to becoming a member of the fretless Ric club, but it wasn't meant to be...
I do have a couple of non-Ric fretlesses - one of the necks on my Alembic doubleneck is fretless, and I recently scored an early-'70s Guild M-85 II fretless, which is interesting because it is short scale (30"). My first fretless was a Fender Japan Jazz Bass back in the '80s - I found it very difficult to play mainly because it didn't have lines - the only markers were at the 5-7-9-12-15-17-19 positions on the side of the neck - not where the frets would be but where the markers go on a regular fretted! Very frustrating as a young player, though I probably could have dealt with it if I practiced more
I do have a couple of non-Ric fretlesses - one of the necks on my Alembic doubleneck is fretless, and I recently scored an early-'70s Guild M-85 II fretless, which is interesting because it is short scale (30"). My first fretless was a Fender Japan Jazz Bass back in the '80s - I found it very difficult to play mainly because it didn't have lines - the only markers were at the 5-7-9-12-15-17-19 positions on the side of the neck - not where the frets would be but where the markers go on a regular fretted! Very frustrating as a young player, though I probably could have dealt with it if I practiced more
Re: Techniques On The 4001/3FL
Sorry guys, lost sight of this one!cassius987 wrote:Tony, Bill Conklin makes something nearly identical to that Alembic for 1/5 the price. He calls it the MEU. I have played one in his workshop. They are quite lovely and play a lot more like an upright than an electric--his vision was just an ergonomic upright-style instrument that was easy to transport. The one I played was made of cherry wood. Check it out...
Thanks Josh, I'm off to check it out......MUCH APPRECIATED.
Jeff, can you give me some more info on that NS? You are the first one I know who's had one. THANKS!
OH, that ALEMBIC!
Re: Techniques On The 4001/3FL
When I played the Classico, it didn't go Mwah, it was more like Toe-Ni.ajish4 wrote:Jeff, can you give me some more info on that NS? You are the first one I know who's had one. THANKS!
OH, that ALEMBIC!![]()
![]()
The NS was a great sounding bass, with tonal flexibility due to both the adjustable (lateral-vertical sensitivity) piezo pickup and the EMG magnetic pickups. However, I much preferred the piezo over the EMGs. Due to that I would consider the WAV or the brand new NXT bass, which does away with the EMG pickups.
Here is the NS site:
http://www.nedsteinberger.com/
Go ahead and drool!
Re: Techniques On The 4001/3FL
Thanks Jeff,
Just sent for a catalog.
Check this out!
http://www.basscentral.com/2003/nsdesigns.shtml
LOL, Toe-Ni!
Joshua, WOW! Sweet looking bass for sure, neat design too! Thanks for the heads up.
Can't do anything til next year, but HOPEFULLY if I leave the catalog around.....like the magazine in A Christmas Story, Janey will get the hint!

Just sent for a catalog.
Check this out!
http://www.basscentral.com/2003/nsdesigns.shtml
LOL, Toe-Ni!
Joshua, WOW! Sweet looking bass for sure, neat design too! Thanks for the heads up.
Can't do anything til next year, but HOPEFULLY if I leave the catalog around.....like the magazine in A Christmas Story, Janey will get the hint!
- rickenbrother
- RRF Moderator
- Posts: 13218
- Joined: Sun May 26, 2002 5:00 am
Re: Techniques On The 4001/3FL
Can we get back to the original subject please? 
JETGLO should officially be renamed JETGLO ROCKS! 
Re: Techniques On The 4001/3FL
With your luck you'll end up with a NS violin!ajish4 wrote:Can't do anything til next year, but HOPEFULLY if I leave the catalog around.....like the magazine in A Christmas Story, Janey will get the hint!![]()
Now back to the FL.
- FretlessOnly
- Advanced Member
- Posts: 1605
- Joined: Sat Feb 21, 2009 9:00 pm
Re: Techniques On The 4001/3FL
I'll add this nugget regarding the FL: given its "organic" nature and ability to "speak," I wouldn't dream of using a pick on one.
Can we have everything louder than everything else?
