A Couple Questions Regarding the 4004 Series

Vintage, Modern, V & C series, Fretless, Signature & Special Editions

Moderators: rickenbrother, ajish4

Post Reply
Malchik
New member
Posts: 73
Joined: Wed Jun 30, 2010 11:56 pm

A Couple Questions Regarding the 4004 Series

Post by Malchik »

I really need to by one of these instruments but I have a couple small questions regarding this model, specifically the 4004L. This is the junior model to the 4000Cii right? The Rickenbacker website suggests the only difference is the wood the wings are constructed from. They only list the wood as 'Hardwood'. What kind? Basswood? Maple?

The second question is simple. Are the humbuckers standard six pole? I never came across a Rickenbacker bass humbucker.

Thanks!
User avatar
libratune
Veteran RRF member
Posts: 4255
Joined: Mon Jul 29, 2002 9:06 am
Contact:

Re: A Couple Questions Regarding the 4004 Series

Post by libratune »

First question: Laredo is constructed with a maple neck-thru and solid maple body wings. Headstock wings are walnut.

Cheyenne II is constructed the same except body wings are a core of walnut sandwiched in between maple, front and back, often flamed.

I forget what wood the fretboards are made of -- Bubinga?

2nd question: I believe the HB-1 pickups are standard on both models and are the same as those issued on 6-string models, but I don't know the construction as to poles.
User avatar
cheyenne
Veteran RRF member
Posts: 6263
Joined: Fri Feb 16, 2001 11:39 am

Re: A Couple Questions Regarding the 4004 Series

Post by cheyenne »

Based on my experience with both models, the 4004L has more "pop" and sounds brighter, and the 4004CII sounds deeper / darker.

this is probably due to the CII's walnut core. The neck on both are wider/flatter than a standard 4003 and at first seems a little "large".

Nice basses though.
"Knowledge is Power"
User avatar
rickenbrother
RRF Moderator
Posts: 13218
Joined: Sun May 26, 2002 5:00 am

Re: A Couple Questions Regarding the 4004 Series

Post by rickenbrother »

Malchik wrote:I really need to by one of these instruments but I have a couple small questions regarding this model, specifically the 4004L. This is the junior model to the 4000Cii right? The Rickenbacker website suggests the only difference is the wood the wings are constructed from.

Thanks!
The price difference reflects the more involved body wood construction of the Cheyenne as Ron explained and also the hardware.
The other difference between the two models is that the hardware on the Cheyenne is gold hardware, on the Laredo it's chrome.

libratune wrote:I forget what wood the fretboards are made of -- Bubinga?
That's right! :)
JETGLO should officially be renamed JETGLO ROCKS! :-)
nukebass
Veteran RRF member
Posts: 707
Joined: Thu Jan 25, 2001 6:21 pm

Re: A Couple Questions Regarding the 4004 Series

Post by nukebass »

The hardwood designation gives Rickenbacker the option of using hardwoods other than maple for the wings on the L. I don't know if they ever have since all the ones you see are maple, but they could and still be accurate to the specifications.
bluewhale
Member
Posts: 362
Joined: Sat Nov 07, 2009 9:05 pm

Re: A Couple Questions Regarding the 4004 Series

Post by bluewhale »

The Laredo fingerboard is finished, while the Cii fingerboard is unfinished. The corporate website currently spells this out for the Cii.

Maybe the difference can be heard.
User avatar
libratune
Veteran RRF member
Posts: 4255
Joined: Mon Jul 29, 2002 9:06 am
Contact:

Re: A Couple Questions Regarding the 4004 Series

Post by libratune »

bluewhale wrote:The Laredo fingerboard is finished, while the Cii fingerboard is unfinished. The corporate website currently spells this out for the Cii.
Here's what is on the corporate website for the 4004Cii under "Models." Nothing about the fretboard that I could see there, though I've seen comments elsewhere as to the fretboard. Maybe I was looking in the wrong place:

Using only American farm-grown sustainable woods, this exquisite bass is sculpted from solid Maple and Walnut, complemented by an Eastern Maple neck running the full length of the bass. Two humbucking pickups are carefully placed for maximum tonal capability. Available in all standard colors, plus translucent Green, Red, or Blue, all with a rich gloss clear coat.
User avatar
rickenbrother
RRF Moderator
Posts: 13218
Joined: Sun May 26, 2002 5:00 am

Re: A Couple Questions Regarding the 4004 Series

Post by rickenbrother »

I think there might not be a mention about the finish on the fingerboard because though usually the Laredo fingerboard is finished, while the Cii fingerboard is unfinished, I'm sure there are a few exceptions.
Hard to see in this pic, but my Mapleglo Cii/5 has a finished fingerboard.
Image
JETGLO should officially be renamed JETGLO ROCKS! :-)
bluewhale
Member
Posts: 362
Joined: Sat Nov 07, 2009 9:05 pm

Re: A Couple Questions Regarding the 4004 Series

Post by bluewhale »

libratune wrote:
bluewhale wrote:The Laredo fingerboard is finished, while the Cii fingerboard is unfinished. The corporate website currently spells this out for the Cii.
Here's what is on the corporate website for the 4004Cii under "Models." Nothing about the fretboard that I could see there, though I've seen comments elsewhere as to the fretboard. Maybe I was looking in the wrong place:

Using only American farm-grown sustainable woods, this exquisite bass is sculpted from solid Maple and Walnut, complemented by an Eastern Maple neck running the full length of the bass. Two humbucking pickups are carefully placed for maximum tonal capability. Available in all standard colors, plus translucent Green, Red, or Blue, all with a rich gloss clear coat.
"Fingerboard Wood: Bubinga, unfinished" appears under "Specifications."
Post Reply

Return to “Rickenbacker Basses: by Joey Vasco & Tony Cabibe”