Will this fit my V64? im presuming it will but im just checking in with the gang for reassurance.No issues right now but im noticing the B/E slots are looking deep. Thanks in advance
http://cgi.ebay.co.uk/Genuine-Rickenbac ... 2224wt_901
Just a quickie
Moderators: rickenbrother, ajish4
Re: Just a quickie
Yes it should fit.
Though the slots may appear deep, the nut is likely ~1/8" "taller" than you will need, so you'll end up removing some material (from the bottom and/or top) to get it to the correct height.
Also, the RIC factory nuts I have purchased have very lightly scored slots, not so deep as the photo shows.
Though the slots may appear deep, the nut is likely ~1/8" "taller" than you will need, so you'll end up removing some material (from the bottom and/or top) to get it to the correct height.
Also, the RIC factory nuts I have purchased have very lightly scored slots, not so deep as the photo shows.
Re: Just a quickie
Thanks Ron as i say ive not issues right now but i have noticed that it will need replacing.