1974 MG Bass Value?

Vintage, Modern, V & C series, Fretless, Signature & Special Editions

Moderators: rickenbrother, ajish4

Post Reply
User avatar
rkbsound
Veteran RRF member
Posts: 1205
Joined: Fri Apr 19, 2002 3:48 pm
Contact:

1974 MG Bass Value?

Post by rkbsound »

I would normally post this in the "Appraisals" section, but thought it would get more attention here, and the bass in question is not mine -- just one I am possibly interested in acquiring.

I saw it today and it is a September, 1974, 4001. Not being a bass player, I assume it's a 4001. It is missing the tuners, neck pick-up, and electronics. It has a cracked headstock. The crack goes length-wise an inch or two from the nut downward and inward. No pics - sorry! It looks like it could be repaired without major issue. There is also a cavity on the back that appears to be made for a 9-volt battery. There is no visible hole for a wire to go through to the electronics, so it's a bit of a mystery to me what that is for. It appears to be "professionally" done.

I am curious as to the (#1)current value of the bass, as well as (#2) what the value would be once put in playable condition. The finish is actually good, and no re-finishing would be necessary.

I don't think the owner is interested in selling. A couple of years ago I inquired about it and they said that RIC is sending parts. They said the same thing today. I don't think any "parts" are coming. They also said that restored, it is worth $3,000-$4,000.00, since it is a '70's Rick bass. I offered $500 as-is and was laughed at.

So I don't know why they are holding on to this bass -- there must be "more" to the story. Could have been owned by someone famous - very possible - but I don't think so. I don't play bass, but would like a project to have some fun with and maybe learn bass in the process. I have a '66 Rick guitar pickup I think would work in the neck (?), so getting the rest of the parts should be relatively easy, I would think. I don't think that the neck is that big of an issue, but I'm not willing to bet big money on it, either.

Thoughts? --Jeff.
User avatar
badeggs
Intermediate Member
Posts: 865
Joined: Tue Jul 24, 2007 5:04 am

Re: 1974 MG Bass Value?

Post by badeggs »

Dunno, $500 seems fine to me considering the missing parts and the split in the 'stock. And it was routed...sounds like a mess, frankly!

Era-wise it should have hi-gains (or hi-gain in this case), poured inlays, zinc tailpiece/bridge. Maybe red dots but if it's a late '74 then probably not. So nothing super-valuable in the hardware department. Pics would obviously help here...what color is it?

4k restored? You should laugh twice as hard back at them.
User avatar
rkbsound
Veteran RRF member
Posts: 1205
Joined: Fri Apr 19, 2002 3:48 pm
Contact:

Re: 1974 MG Bass Value?

Post by rkbsound »

It's a Mapleglo. It was made in the Sept/October timeframe.
User avatar
badeggs
Intermediate Member
Posts: 865
Joined: Tue Jul 24, 2007 5:04 am

Re: 1974 MG Bass Value?

Post by badeggs »

To complete the restoration you need at least:

70s Neck Hi-Gain - $200 (you have a 60s toaster, so you can maybe skip this one)
Set of Grover Slimline Tuners - $200 (it may have had reverse Klusons)
Wiring Harness (period-correct) - $100-150

...and anything else it might need - how are the truss rods? How's the pickguard? Is just the harness missing, or do you need the knobs/switch too? And you gotta fix the neck crack and the rout (if you choose to). Maybe get it refinished after either or both repairs.

A complete late-74 or 75 4001 should fetch around $1500-$2000 nowadays. Maybe up your offer to, say, $700 for it as-is, depending on how far you want to take it. But that would be my ceiling. And I'm guessing they wouldn't accept that offer either, since they're sitting on such a "gold mine" and all.
User avatar
cjj
RRF Moderator
Posts: 10932
Joined: Tue Jul 22, 2008 6:17 pm
Contact:

Re: 1974 MG Bass Value?

Post by cjj »

Yeah, what a gold mine...
:roll: :lol: :lol:

I bought a '76 4001 Azureglo about 2 years ago with a repaired neck crack, everything else all original, definitely used, chips and dings, but pretty good in general, definitely playable, and no extra holes either.

So, there's a '70s bass, in a somewhat rare color even. Did I pay $3000-$4000? Nope. I paid $700.

So yeah, with all that's wrong with that bass, I'd say $700 is definitely about the top of what I'd consider paying...
I have NO idea what to do with those skinny stringed things... I'm just a bass player...
User avatar
jps
RRF Consultant
Posts: 37507
Joined: Wed Feb 12, 2003 6:00 am

Re: 1974 MG Bass Value?

Post by jps »

I agree with the pricing assessment, so far. The toaster you have would be great in that bass, especially so, if the neck pickup route allows for the ½" pickup spacing to the neck. 8)
User avatar
woodyng
Senior Member
Posts: 4478
Joined: Thu Jan 11, 2007 11:11 am

Re: 1974 MG Bass Value?

Post by woodyng »

Sounds like the seller has been drinking the Ebay kool-aid for pricing. If i thought i could get $3000 or more for my '74 4000,it would be gone! 8)
User avatar
antipodean
Senior Member
Posts: 3182
Joined: Wed Jan 09, 2008 1:27 am

Re: 1974 MG Bass Value?

Post by antipodean »

A '74 4001 MG in excellent original condition should be around $1,400 - $1,600, not $3000. IMHO your offer of $500 for the poor battered hulk was generous....
"I don't want to sound incredulous but I can't believe it" Rex Mossop
User avatar
johnallg
Rick-a-holic
Posts: 17688
Joined: Wed Apr 05, 2006 12:13 pm

Re: 1974 MG Bass Value?

Post by johnallg »

antipodean wrote:IMHO your offer of $500 for the poor battered hulk was generous....
I agree. $500 for a bass in that condition (especially the back rout), the cracked neck, and no parts is generous. I would have laughed at the $3-4000 too.
daveman
Member
Posts: 242
Joined: Sun Sep 09, 2007 10:18 am

Re: 1974 MG Bass Value?

Post by daveman »

I would pass on this over $500. If you want a wrecked 70's Rick bass to work on, just keep an eye on eBay and you'll see them.
Post Reply

Return to “Rickenbacker Basses: by Joey Vasco & Tony Cabibe”