Level 3 finish on 4003

petersland · Post by **petersland** » Thu Jul 18, 2013 6:31 pm

Phew! It's comforting to hear that sub-standard instruments are NOT leaving the factory, regardless of cost or circumstances. With on-line purchases the norm these days, it s all too easy to be ripped off. I too am pleased there may be an investigation.
I have a luthier friend here in Perth who also builds world renowned guitars. I have seen him put one of his finished bodies through a band saw as it wasn't up to standard. He'd rather it be used for firewood than be associated with his brand/name.
Thanks for your responses, I feel more comforted now.

Colonel Sanders · Post by **Colonel Sanders** » Thu Jul 18, 2013 8:30 pm

petersland wrote: I have a luthier friend here in Perth who also builds world renowned guitars. I have seen him put one of his finished bodies through a band saw as it wasn't up to standard. He'd rather it be used for firewood than be associated with his brand/name.
Thanks for your responses, I feel more comforted now.

Is that Perry Ormsby?

AlexM · Post by **AlexM** » Thu Jul 18, 2013 9:08 pm

On the subject of refins.. Anyone in oz worth talking to?

antipodean · Post by **antipodean** » Thu Jul 18, 2013 10:22 pm

AlexM wrote:On the subject of refins.. Anyone in oz worth talking to?

Where are you located Alex? If you're in Sydney, I'd recommend Frank Grubisa - he is brilliant.

wilbur88 · Post by **wilbur88** » Fri Jul 19, 2013 12:35 am

Colonel Sanders wrote:
petersland wrote: I have a luthier friend here in Perth who also builds world renowned guitars. I have seen him put one of his finished bodies through a band saw as it wasn't up to standard. He'd rather it be used for firewood than be associated with his brand/name.
Thanks for your responses, I feel more comforted now.
Is that Perry Ormsby?

I'm guessing so....

petersland · Post by **petersland** » Fri Jul 19, 2013 4:03 am

Perry would be correct.

Colonel Sanders · Post by **Colonel Sanders** » Fri Jul 19, 2013 6:09 am

petersland wrote:Perry would be correct.

That is the only guy I would trust in Perth. I still need to find the time to drop three of my Ricks for a fret dressing over his place.

Colonel Sanders · Post by **Colonel Sanders** » Fri Jul 19, 2013 6:13 am

wilbur88 wrote:
Colonel Sanders wrote:
petersland wrote: I have a luthier friend here in Perth who also builds world renowned guitars. I have seen him put one of his finished bodies through a band saw as it wasn't up to standard. He'd rather it be used for firewood than be associated with his brand/name.
Thanks for your responses, I feel more comforted now.
Is that Perry Ormsby?
I'm guessing so....

Hi Terry.

Welcome to the forum.

I see you are in Margaret River. This is a lovely place that reminds me my homeplace in Québec.

I am over there for the weekend in a VERY nice holyday home to forget about the job and enjoy the vineyards!

petersland · Post by **petersland** » Fri Jul 19, 2013 7:36 am

Hey Jeff,
If Perry's busy(as he usually is) and you get stuck, give me a shout. I'd be happy to help out.
Cheers, Pete

Colonel Sanders · Post by **Colonel Sanders** » Fri Jul 19, 2013 8:10 am

petersland wrote:Hey Jeff,
If Perry's busy(as he usually is) and you get stuck, give me a shout. I'd be happy to help out.
Cheers, Pete

Is he still located around Fremantle or did he moved more in your neck of the wood?

geofio · Post by **geofio** » Fri Jul 19, 2013 3:03 pm

I contacted Rossetti in the uk re my paint issue on a brand new 4003 JG over a week ago still no reply not happy with this as a multiple ric owner, i expect a reply, i received a swift reply from Rickenbacker, Brendan at the customer service dept assured me Rossetti would sort the issue. giving it till monday.

Ashgray · Post by **Ashgray** » Fri Jul 19, 2013 3:34 pm

Hi George

I'd recommend you speak with Shelley Cleave at Rosetti, as through past experience I've found her to be absolutely brilliant at understanding how customers need to be treated (she managed to locate for me their last black Rick tailpiece with the additional two anchor screws, which I needed for my 4008, and which had lain unrecorded on a dusty shelf at Rosetti for ten years!). She could not have been more helpful. If she's not around, the manager's name is Christine (also good, surname unknown).

Shelley Cleave
Spares Department
Rosetti Limited
4 Blackwell Drive
Springwood Industrial Estate
Braintree
Essex
CM7 2QJ

Tel: 01376 550033

Ash

geofio · Post by **geofio** » Fri Jul 19, 2013 3:49 pm

thanks ash, will call monday. cheers

wilbur88 · Post by **wilbur88** » Sat Jul 20, 2013 12:02 am

Colonel Sanders wrote: Is that Perry Ormsby?

I'm guessing so....[/quote]

Hi Terry.

Welcome to the forum.

I see you are in Margaret River. This is a lovely place that reminds me my homeplace in Québec.

I am over there for the weekend in a VERY nice holyday home to forget about the job and enjoy the vineyards![/quote]

Hi Jeff,

Yes it's great here in Margs, especially today. Not a cloud in the sky! Are you here this weekend? I'm in the wine business myself.

Pete is a good man - and does nice work on Rics. He was the only one to be able to fix some issues I had with mine a while back.

By the way, yes Perry has moved to the northern suburbs somewhere I think.

Cheers,
Terry

wilbur88 · Post by **wilbur88** » Sat Jul 20, 2013 12:04 am

petersland wrote:Hey Jeff,
If Perry's busy(as he usually is) and you get stuck, give me a shout. I'd be happy to help out.
Cheers, Pete

Pete's the man.

Rickresource Rickenbacker Forum

Level 3 finish on 4003

Re: Level 3 finish on 4003

Re: Level 3 finish on 4003

Re: Level 3 finish on 4003

Re: Level 3 finish on 4003

Re: Level 3 finish on 4003

Re: Level 3 finish on 4003

Re: Level 3 finish on 4003

Re: Level 3 finish on 4003

Re: Level 3 finish on 4003

Re: Level 3 finish on 4003

Re: Level 3 finish on 4003

Re: Level 3 finish on 4003

Re: Level 3 finish on 4003

Re: Level 3 finish on 4003

Re: Level 3 finish on 4003