4001 rick o sound

joev4001 · Post by **joev4001** » Tue Feb 01, 2005 2:17 pm

hi im new at the forum and have had my 1980 4001 for about 9 months. so i know what the rick o sound does, i just think their is a problem with it. so when i plug into the regular jack everything works fine, pickup selector switch is kinda loose so it pops out every now and then, when i plug into the ROS input only the treble pickup works. is this how it is supposed to be or is their a problem?

doctorwho · Post by **doctorwho** » Tue Feb 01, 2005 2:25 pm

Joe, are you plugging a stereo instrument cable into the ROS jack, or a regular instrument cable?

greg_mitchell · Post by **greg_mitchell** » Tue Feb 01, 2005 2:57 pm

The ROS jack is made to accept a stereo plug run thru a ROS box or similar two channel device. See the other thread "Rick-O-Sound or alternatives to the gray box". There may be something in there to help you.
Greg

rictified · Post by **rictified** » Tue Feb 01, 2005 3:10 pm

Yes, Joe if you plug a mono plug into the stereo jack you will only get the treble pickup. If you plug a stereo jack in there you will get the two pickups separated, the other end would be the ric-o-sound unit which will have two mono outputs for two mono cords to go to either two different amps or two different channels of the same amp. There is nothing wrong with your bass.

rictified · Post by **rictified** » Fri Feb 04, 2005 8:33 am

I got my Ric-O-Sound unit today, very cool thing, also comes with one long mono cord, the stereo cord which is attached to the box is about 20'long. It has two mono output jacks for mono cords. The mono cord seems to be even longer. I had one a few years ago but never got to try it out, is a long story why. Both cords are high quality as are the switchcraft jacks.

greg_mitchell · Post by **greg_mitchell** » Fri Feb 04, 2005 9:06 am

Bob, I got mine today also. I can't wait to try it tonight at practice. I'm gonna run the bass thru a Peavey 400w Standard w/ 2X12 cab and the treble thru a Fender bassman 200w/ 1X12 and a horn. Thats the initial plan anyway. I may wind up using the 2 channels of the Peavey by themselves.

rictified · Post by **rictified** » Fri Feb 04, 2005 8:03 pm

I'm not going to be able to try mine for real for a while until we play a big club. I'm going to set up two SVT's, that should sound and look killer.

greg_mitchell · Post by **greg_mitchell** » Sat Feb 05, 2005 10:14 am

Bob, I set up my R-O-S last night in the former way described in my previous post. After a bit of tweaking to get the right eq adjustments, I couldn't believe the sound. It really cleaned up my sound and I cut through the mix better than I ever had before. It was great.
One of the guitar players said "Damn, now were gonna have to carry TWO bass amps". I guess he liked the sound,too.

rictified · Post by **rictified** » Sat Feb 05, 2005 10:43 am

It's going to be a while before I can try it out on the job I think.

apollo11 · Post by **apollo11** » Sat Feb 05, 2005 12:06 pm

I received mine in the mail today from Pick of the Rics, and it is pretty awesome to use. The sound is incredibly full with the two amps, and believe it or not, there is almost no hum, like when using the mono jack. It is extremely quiet when running in stereo. What a nice surprise that was. To my ears, ROS does seem to subdue the Ric bite just a tad, giving it more of a jazz sound.

The only downfall with this kit? The other basses in my collection will sound even duller by comparison!

For all the negative things I've read and heard about the stereo feature, now I can say, from first hand experience, that it a fantastic option to have, and now I'm wishing my other basses had it!

greg_mitchell · Post by **greg_mitchell** » Sat Feb 05, 2005 12:15 pm

Apollo 11----me too!

syncop8r · Post by **syncop8r** » Sat Feb 05, 2005 12:39 pm

All you Rick-O-Sounders - what amps are you putting the bridge pickup through?

greg_mitchell · Post by **greg_mitchell** » Sat Feb 05, 2005 12:45 pm

the neck pup on mine went thru a 400w Peavey Standard w/2 15s (not 12s as I said earlier. I was wrong). The bridge pup went thru a Fender Bassman 200w w/ 1X12 and a piezo horn.

Lost Coyotes · Post by **Lost Coyotes** » Sat Feb 05, 2005 1:26 pm

I have two 400RBs and two Mesa/Boogie 1x15 cabs.
Run ric-o-sound into that, sounds very cool. And not much invested, either.

thx1955 · Post by **thx1955** » Sat Feb 05, 2005 2:13 pm

At the moment I'm running both channels into an Ampeg B-25. However, I'm about to try sending the tail pickup into a Fender Bassman 400 Combo with a pair of 10's and see how that sounds ....