480s

Vintage, Modern, V & C Series, Signature & Special Editions

Moderators: rickenbrother, ajish4

User avatar
tony_carey
Advanced Member
Posts: 2055
Joined: Thu Oct 28, 2004 6:00 am
Contact:

Post by tony_carey »

Paul & Peter...you are making me feel very inferior. You don't have to be a chemist to post here....but it helps!
'Rickenbacker'...what a name! After all these years, it still thrills me.
User avatar
admin
Site Admin
Posts: 15126
Joined: Wed Jul 05, 2000 5:00 am
Contact:

Post by admin »

Tony: We all deal with the chemistry of life every day. The chemistry of playing Rickenbackers is surely the most fascinating of them all!
Life, as with music, often requires one to let go of the melody and listen to the rhythm

Please join the Official RickResource Forum Facebook Page https://www.facebook.com/groups/379271585440277
User avatar
jingle_jangle
RRF Moderator
Posts: 22679
Joined: Wed Dec 22, 2004 6:00 am
Contact:

Post by jingle_jangle »

Amen. We're just being tediously Sherlockian.

Peter, sulphur would be on the top of my list! Wonder why I didn't think of that. But in your like to Axel's guitar, he makes it pretty clear that the guitar has been on the wall or on a floor stand most of its life.

Wonder if there is a coal-fired power plant across the street?
“I say in speeches that a plausible mission of artists is to make people appreciate being alive at least a little bit. I am then asked if I know of any artists who pulled that off. I reply, 'The Beatles did.”
― Kurt Vonnegut
User avatar
johnhall
RIC
Posts: 3926
Joined: Tue Sep 26, 2000 11:17 am
Contact:

Post by johnhall »

The white didn't likely yellow- the clear coat did. The nameplate protected the surface of the finish.

I'm with Peter on the foam theory, except that it's probably not from the case but additional packing-grade foam placed in the case by the owner. That stuff emits all kinds of foul stuff, including sulphur, as it degrades.

That being said, I have seen guitars owned by smokers that have this "patina".
mikeselmer
New member
Posts: 40
Joined: Wed Jan 12, 2005 8:45 am

Post by mikeselmer »

Hi! I have a lacquer-related question. What type of lacquer was used on Rics in the mid 1970s (especially on model 480)? Was it cellulose (is this the word) or some more contemporary type of lacquer? I'm trying to calculate the price of re-finishing a 1975 480. I've heard that cellulose lacquer is usually more expensive to peel of and do again because of crackling.
User avatar
jingle_jangle
RRF Moderator
Posts: 22679
Joined: Wed Dec 22, 2004 6:00 am
Contact:

Post by jingle_jangle »

Nitrocellulose is easier than modern finishes (like polyurethane) to remove from a guitar. A finish is not peeled off, but either chemicaly or abrasively removed.

The only time that checking comes into it is when dirt has worked its way into the cracks; then the dirt must be dealt with, especially id the guitar has a transparent finish.
“I say in speeches that a plausible mission of artists is to make people appreciate being alive at least a little bit. I am then asked if I know of any artists who pulled that off. I reply, 'The Beatles did.”
― Kurt Vonnegut
mikeselmer
New member
Posts: 40
Joined: Wed Jan 12, 2005 8:45 am

Post by mikeselmer »

Hi all! I have a question about the pickups used in 480s. Simply, what pickups are they? Are they hi-gains? Did 480s come with different pickups?
User avatar
jwilli
RRF Consultant
Posts: 4327
Joined: Sun Aug 06, 2000 8:45 pm

Post by jwilli »

Hi-gains. You might have been able to specify Hi-gain or Toaster back then. Maybe not. :-)
Post Reply

Return to “Rickenbacker Guitars: by John Simmons”