Repairing A Chip

Exceptional restoration is in the details

Moderator: jingle_jangle

ryan.jones
Junior Member
Posts: 101
Joined: Sun Oct 14, 2007 8:52 am

Re: Repairing A Chip

Post by ryan.jones »

that scanner at the local shurwen-willums is amazing. i took a mid-sixties 4001 with a ding to them, had then scan the colors right next to the chip, and they came up with a (minimum order) pint of something that filled it perfectly. i used a toothpick to put it in, and had to do it nine times until it was level with the rest of the finish. a little 1000 grit later, and you cannot see that the chip was ever there. yippie paint store with the newest scanner thingie :D
User avatar
rickenbrother
RRF Moderator
Posts: 13194
Joined: Sun May 26, 2002 5:00 am

Re: Repairing A Chip

Post by rickenbrother »

What finish does that 4001 have, Ryan?
JETGLO should officially be renamed JETGLO ROCKS! :-)
User avatar
paologregorio
Senior Member
Posts: 6376
Joined: Wed Aug 08, 2007 12:56 pm
Contact:

Re: Repairing A Chip

Post by paologregorio »

And what type of paint would one ask for?
User avatar
paologregorio
Senior Member
Posts: 6376
Joined: Wed Aug 08, 2007 12:56 pm
Contact:

Re: Repairing A Chip

Post by paologregorio »

bump
User avatar
jingle_jangle
RRF Moderator
Posts: 22679
Joined: Wed Dec 22, 2004 6:00 am
Contact:

Re: Repairing A Chip

Post by jingle_jangle »

Jumping in:

This must be a house paint type store; none of my car paint places use a computer/scanner; it's useless except for solid colors, and then it won't adjust for the usual issue of paint drying lighter or darker than it is when liquid in the can.

I'm sure manufacturers have some sort of very pricey analysis equipment, but to my knowledge, none of it has filtered down to the local level.

I had a lathe the got badly chipped in transit to my shop; I took a panel to my local machinery paint store, who do have a scanner. They matched it perfectly, in the can. Once it dried, it was about two shades darker (it was a very light gray).

A scanner will not deliver a match on any sort of pearlescent, candy, two or three-stage finish, or metallic. If the match you got was for an area of FG, you probably got an opaque match that would work as a "cheat" for a tiny area, which took into account not only the transparent FG dye, but the wood behind it, which acts as a reflective surface to bounce light back through the dye to your eye. I have some FG "cheats" mixed up, that I rarely will use to hide a knot or a bad bit of grain or a filled dent in a FG refinish.
User avatar
rickenbrother
RRF Moderator
Posts: 13194
Joined: Sun May 26, 2002 5:00 am

Re: Repairing A Chip

Post by rickenbrother »

I'll just try to find some yellow and orange nail polishes tomorrow morning to mix into red nail polish. Maybe I can make an acceptable color match.
JETGLO should officially be renamed JETGLO ROCKS! :-)
User avatar
kiramdear
RRF Moderator
Posts: 9045
Joined: Fri Jun 27, 2008 2:51 am
Contact:

Re: Repairing A Chip

Post by kiramdear »

rickenbrother wrote:I'll just try to find some yellow and orange nail polishes tomorrow morning to mix into red nail polish. Maybe I can make an acceptable color match.
Joey, remember to let your test samples harden thoroughly before comparison, as the color shifts during drying. :)
All I wanna do is rock!
User avatar
johnallg
Rick-a-holic
Posts: 17688
Joined: Wed Apr 05, 2006 12:13 pm

Re: Repairing A Chip

Post by johnallg »

kiramdear wrote:
rickenbrother wrote:I'll just try to find some yellow and orange nail polishes tomorrow morning to mix into red nail polish. Maybe I can make an acceptable color match.
Joey, remember to let your test samples harden thoroughly before comparison, as the color shifts during drying. :)
Something a guy wouldn't have known! My black dries black! :lol: :lol: :lol:
User avatar
jingle_jangle
RRF Moderator
Posts: 22679
Joined: Wed Dec 22, 2004 6:00 am
Contact:

Re: Repairing A Chip

Post by jingle_jangle »

kiramdear wrote:
rickenbrother wrote:I'll just try to find some yellow and orange nail polishes tomorrow morning to mix into red nail polish. Maybe I can make an acceptable color match.
Joey, remember to let your test samples harden thoroughly before comparison, as the color shifts during drying. :)
I apologize if I am beginning to sound picky and pedantic; Kira...but transparent/translucent colors generally do not shift during drying; this is a characteristic of solid colors, specifically pastels. Just want to be accurate, here. :wink:
User avatar
kiramdear
RRF Moderator
Posts: 9045
Joined: Fri Jun 27, 2008 2:51 am
Contact:

Re: Repairing A Chip

Post by kiramdear »

Thanks, Paul, that's fine, I didn't know that about transparents :) Would those be the ones they use in nail lacqer? They don't seem real transparent when you put them on...
All I wanna do is rock!
User avatar
rickenbrother
RRF Moderator
Posts: 13194
Joined: Sun May 26, 2002 5:00 am

Re: Repairing A Chip

Post by rickenbrother »

kiramdear wrote:
rickenbrother wrote:I'll just try to find some yellow and orange nail polishes tomorrow morning to mix into red nail polish. Maybe I can make an acceptable color match.
Joey, remember to let your test samples harden thoroughly before comparison, as the color shifts during drying. :)
Thanks for the heads-up, Kira. I'll have my resident nail polish expert/wearer check it out first. :D

I'll probably also post pics of possible shades.
JETGLO should officially be renamed JETGLO ROCKS! :-)
User avatar
jingle_jangle
RRF Moderator
Posts: 22679
Joined: Wed Dec 22, 2004 6:00 am
Contact:

Re: Repairing A Chip

Post by jingle_jangle »

kiramdear wrote:Thanks, Paul, that's fine, I didn't know that about transparents :) Would those be the ones they use in nail lacqer? They don't seem real transparent when you put them on...
All except the most vibrant solid reds and maroons will transmit light, Kira. Dab some on a window pane to verify this. Even some black nail polishes are see-through to some extent.
User avatar
jps
RRF Consultant
Posts: 37496
Joined: Wed Feb 12, 2003 6:00 am

Re: Repairing A Chip

Post by jps »

rickenbrother wrote:
kiramdear wrote:
rickenbrother wrote:I'll just try to find some yellow and orange nail polishes tomorrow morning to mix into red nail polish. Maybe I can make an acceptable color match.
Joey, remember to let your test samples harden thoroughly before comparison, as the color shifts during drying. :)
Thanks for the heads-up, Kira. I'll have my resident nail polish expert/wearer check it out first. :D

I'll probably also post pics of possible shades.
I see, so now Diane's nails have to match whatever bass you gigging with that night? :lol:
User avatar
rickenbrother
RRF Moderator
Posts: 13194
Joined: Sun May 26, 2002 5:00 am

Re: Repairing A Chip

Post by rickenbrother »

jps wrote:I see, so now Diane's nails have to match whatever bass you gigging with that night? :lol:
Don't give her any ideas!! :shock:
JETGLO should officially be renamed JETGLO ROCKS! :-)
User avatar
rickenbrother
RRF Moderator
Posts: 13194
Joined: Sun May 26, 2002 5:00 am

Re: Repairing A Chip

Post by rickenbrother »

Well, I've had lousy luck so far trying to find a good yellow or orange. The ones I've found have been metallic! :twisted:
JETGLO should officially be renamed JETGLO ROCKS! :-)
Post Reply

Return to “Reflections of a Curmudgeon: by Paul Wilczynski”