Repairing A Chip

Exceptional restoration is in the details

Moderator: jingle_jangle

Post Reply
User avatar
rickenbrother
RRF Moderator
Posts: 13194
Joined: Sun May 26, 2002 5:00 am

Repairing A Chip

Post by rickenbrother »

I had already discussed this with Paul W at this past SoCal confluence, but I thought it might make a good topic here.
I got this V63 right after the confluence. Paul had advised me about using nail polish, which was something I had previously done on solid finished with great results, but never tried on a translucent finish.
I knew this chip was on this V63 when I bought it. If this chip was anywhere else on this bass, it wouldn't bother me, but it's right there on the face of the body.
I've been trying several shades of red nail polish, on pieces of wood before I attempt to apply them to this bass. The problem is they all seem to turn pinkish. The other problem is the chip is right at the point of the shading of the fireglo.
Since I work for a company that makes inks I was thinking about trying some diluted red inks, but I'm concerned about the color fading after so many years.
This V63 used to belong to John Biscuti and then also Sam Davis.

The beauty.
Image

With a zit.
Image
JETGLO should officially be renamed JETGLO ROCKS! :-)
User avatar
sloop_john_b
Rick-a-holic
Posts: 13843
Joined: Tue Jan 25, 2005 6:00 am

Re: Repairing A Chip

Post by sloop_john_b »

Don't look at me Joey, it didn't have that chip when I owned it!

Image

BTW, I bought the bass from the producer of this show: http://www.fearlessmusic.com/
User avatar
deaconblues
RRF Consultant
Posts: 2390
Joined: Tue Feb 06, 2007 5:14 pm

Re: Repairing A Chip

Post by deaconblues »

I have a chip like that on the edge of my 330. I've considered using nail polish...I would think that even if the color didn't match perfectly, it would be a lot less glaring and probably easier to live with.
User avatar
kiramdear
RRF Moderator
Posts: 9045
Joined: Fri Jun 27, 2008 2:51 am
Contact:

Re: Repairing A Chip

Post by kiramdear »

Wow, that's a toughie, Joey. I had a similar preoccupation with my 320 but thank goodness it's jetglo so a little goth nail enamel did the trick. After being in the art restoration biz I wouldn't like to try to make that ding go away. Translucent colors are murder. After a lot of experimentation you may find a technique that gets you closer to the old look, but complete removal and restoration of the color and finish won't be easy at all.
All I wanna do is rock!
User avatar
jingle_jangle
RRF Moderator
Posts: 22679
Joined: Wed Dec 22, 2004 6:00 am
Contact:

Re: Repairing A Chip

Post by jingle_jangle »

If they're turning too pibkish, mix the reddest one with some translucent orange or yellow. Don't give up--it may take awhile, but you can get very close.

I know of no other way of doing this that is reliable. Inks, magic marker all fade.
User avatar
rickenbrother
RRF Moderator
Posts: 13194
Joined: Sun May 26, 2002 5:00 am

Re: Repairing A Chip

Post by rickenbrother »

The head ink chemist at work said that marker ink would probably fade in time.

My resident nail polish expert (Diane) had also suggested mixing a little yellow into the red, but I hadn't found yellow when I was looking. Didn't think about mixing in some orange. Orange nail polish should be easy to find at this time of the year, I think.
JETGLO should officially be renamed JETGLO ROCKS! :-)
User avatar
jingle_jangle
RRF Moderator
Posts: 22679
Joined: Wed Dec 22, 2004 6:00 am
Contact:

Re: Repairing A Chip

Post by jingle_jangle »

Joey, many nail polishes are quite translucent. Have a look at the bottles and let your eyes tell you how translucent or opaque each color is.

There are yellow colors that are transparent, but you know how manufacturers play the color name game.

Best thing to do is to ignore the names and go for the look.

Avoid metallics, pearls, and colors that look too opaque. An opaque yellow will only muddy the nice translucent red you started out with. Since translucent yellows are generally pretty weak with regard to chroma (another name for intensity), you may find that you're using mostly yellow and adding the red to that.
User avatar
incubus2432
Senior Member
Posts: 4174
Joined: Sat Jul 17, 2004 11:26 am

Re: Repairing A Chip

Post by incubus2432 »

Joey, I used Photoshop and it only took me a few seconds to repair the chip. So give that a try....... :roll: :P

Image

(sorry, I have nothing constructive to add)
User avatar
incubus2432
Senior Member
Posts: 4174
Joined: Sat Jul 17, 2004 11:26 am

Re: Repairing A Chip

Post by incubus2432 »

Joey, if you have any connections that can get you a hookup at an automotive paint supplier you should be able to get your your paint scanned (similar blend area on the RIc) and they'll be able to custom mix what you need. I have a buddy that has gotten me several small touch up size containers of paint for relatively cheap and even without a connection it may still cost you less than buying multiple shades of nail polish looking for the perfect blend. Just a thought.
Last edited by incubus2432 on Mon Oct 20, 2008 7:59 pm, edited 1 time in total.
nukebass
Veteran RRF member
Posts: 707
Joined: Thu Jan 25, 2001 6:21 pm

Re: Repairing A Chip

Post by nukebass »

Even with the chip, that is a really nice looking bass. I need to take notes on this in case I ever decide to fix my chip... Thanks for the discussion!
User avatar
jps
RRF Consultant
Posts: 37496
Joined: Wed Feb 12, 2003 6:00 am

Re: Repairing A Chip

Post by jps »

nukebass wrote:I need to take notes on this in case I ever decide to fix my chip... Thanks for the discussion!
Shoulder chips require a different kind of fix. :mrgreen:
User avatar
beatlefreak
Senior Member
Posts: 6160
Joined: Wed Jun 14, 2006 5:45 am
Contact:

Re: Repairing A Chip

Post by beatlefreak »

Or put a sticker over the chip.
:wink:
User avatar
johnallg
Rick-a-holic
Posts: 17688
Joined: Wed Apr 05, 2006 12:13 pm

Re: Repairing A Chip

Post by johnallg »

beatlefreak wrote:Or put a sticker over the chip.
:wink:
Ahh, but none of the flower power Rickenstickers on eBay at the moment. :lol:
nukebass
Veteran RRF member
Posts: 707
Joined: Thu Jan 25, 2001 6:21 pm

Re: Repairing A Chip

Post by nukebass »

jps wrote:
nukebass wrote:I need to take notes on this in case I ever decide to fix my chip... Thanks for the discussion!
Shoulder chips require a different kind of fix. :mrgreen:
I've already had my shoulder fixed. Oh wait, you didn't mean that kind of chip :mrgreen:
User avatar
rickenbrother
RRF Moderator
Posts: 13194
Joined: Sun May 26, 2002 5:00 am

Re: Repairing A Chip

Post by rickenbrother »

incubus2432 wrote:Joey, I used Photoshop and it only took me a few seconds to repair the chip. So give that a try....... :roll: :P
Actually Brian, I had beaten you to it! :mrgreen:
Image
I fixed the chip in this photo taken by by Sam Davis.
JETGLO should officially be renamed JETGLO ROCKS! :-)
Post Reply

Return to “Reflections of a Curmudgeon: by Paul Wilczynski”