Re: 4002 pick up height
Posted: Sat Oct 12, 2013 9:19 pm
Jeff,
By dimensions what do you mean? Pup heights the Walnut 4002 is at either 3 or 3.5 mm. While the two are 4002's, they differ a bit in many ways. Tail piece location, and neck to name a few. The tail piece on this bass is moved approx 1/4 inch toward the headstock in comparison to the walnut 4002. The neck sits a little higher on this bass as well. By that I mean the neck is approx. 1/8th on an inch higher in pane than the body. The walnuts neck and body are both in the same plane with only the fretboard sitting above that plane.
Sepp
By dimensions what do you mean? Pup heights the Walnut 4002 is at either 3 or 3.5 mm. While the two are 4002's, they differ a bit in many ways. Tail piece location, and neck to name a few. The tail piece on this bass is moved approx 1/4 inch toward the headstock in comparison to the walnut 4002. The neck sits a little higher on this bass as well. By that I mean the neck is approx. 1/8th on an inch higher in pane than the body. The walnuts neck and body are both in the same plane with only the fretboard sitting above that plane.
Sepp