What would you do?

Vintage, Modern, V & C series, Fretless, Signature & Special Editions

Moderators: rickenbrother, ajish4

Post Reply
User avatar
cavernplayer
New member
Posts: 70
Joined: Sun Dec 03, 2006 5:45 pm

What would you do?

Post by cavernplayer »

I have an opportunity to purchase a lefty Mapleglo Ric bass 4001 for around a thousand. It is from the 70's and in terrific shape, almost mint. Here's the catch....the tuners on the headstock aren't Rickenbacker. They have been changed says the owner though the finish on the headstock is perfect. Looks like a close match though not stock. Would you pursue this guitar or let it go for not being a "true" Ric? Any suggestions are helpful. Thanks.
cp
User avatar
rickenbrother
RRF Moderator
Posts: 13222
Joined: Sun May 26, 2002 5:00 am

Post by rickenbrother »

If it is a legit deal, the rest of the bass is truly Rickenbacker and it really is in nice condition, go for it. You can always install Rickenbacker tuners after you have it.
JETGLO should officially be renamed JETGLO ROCKS! :-)
User avatar
johnallg
Rick-a-holic
Posts: 17688
Joined: Wed Apr 05, 2006 12:13 pm

Post by johnallg »

I agree with Joey - if the neck and all check out as great and RIC, then go for it. Tuners are a small issue, unless the holes were enlarged.
User avatar
loverickbass
Veteran RRF member
Posts: 1409
Joined: Mon Jul 29, 2002 5:00 am

Post by loverickbass »

Alot of the 70s basses got their tuners changed out. I'd say go for it.

Cole
User avatar
s4001
Senior Member
Posts: 3514
Joined: Sat Jul 16, 2005 5:00 am
Contact:

Post by s4001 »

It's probably a real Ric. I say gofer it. Tuner changeouts are no big deal. If you're really concerned about it being legit, just check for two truss rods.
"If you think you can or if you think you cannot - either way you are right." Henry Ford.
rickaddict
Senior Member
Posts: 6163
Joined: Mon Mar 29, 2004 7:46 am

Post by rickaddict »

Normally a tuner change isn't a big deal. But look closely at the back of the headstock. If new holes were drilled, make sure they were properly drilled and that no cracks resulted. If the holes for the tuner posts were enlarged for those big-honkin' Schaller M4S tuners or Grover Titans, you may want to take that into consideration when you come up with your bid price.

While you're studying the neck, look for cracks near the nut where the fretboard is laminated to the neck from improper truss rod adjustments.

What year is it? If it is a '72 or early '73 with crushed-pearl inlays and checker binding then you want to jump on it immediately regardless of tuners.
Play what you love, love what you play!
User avatar
beatlefreak
Senior Member
Posts: 6160
Joined: Wed Jun 14, 2006 5:45 am
Contact:

Post by beatlefreak »

Sounds like a decent deal to me.
Ka is a wheel.
User avatar
stts64
Member
Posts: 309
Joined: Tue Dec 05, 2006 6:00 am
Contact:

Post by stts64 »

Yes, that is right. Lots of Rics have changed tuners. My 82 4001 has Grover tuners just like this cool 4001S on eBay now. Take a look: http://cgi.ebay.com/RICKENBACKER-4003S-BASS-1983-4003-S-Nice-83-w-Case-NR_W0QQitemZ190060188530QQihZ009QQcategoryZ4713QQrdZ1QQcmdZViewItem
I am good with my fingers and I can do it all night !
rickaddict
Senior Member
Posts: 6163
Joined: Mon Mar 29, 2004 7:46 am

Post by rickaddict »

Those wavy Grovers are original on the 4001S. RIC used them in 4003s and 4001s around '81-'83.
Play what you love, love what you play!
User avatar
stts64
Member
Posts: 309
Joined: Tue Dec 05, 2006 6:00 am
Contact:

Post by stts64 »

Thanks! Did not know this. They must be replacement on my 82 4001 or are they stock as well?
I am good with my fingers and I can do it all night !
Post Reply

Return to “Rickenbacker Basses: by Joey Vasco & Tony Cabibe”