One of my BC Rich style guitars completed
Posted: Tue Aug 28, 2007 12:09 pm
Well I have one of the bodies ready for finishing. This one will have a bolt on neck and a single Duncan JB humbucker. I used gunstock oil on this one.
http://i36.photobucket.com/albums/e22/guitarman91/100_0248.jpg
The body bare
http://i36.photobucket.com/albums/e22/guitarman91/100_0251.jpg
The body in gun stock oil.
http://i36.photobucket.com/albums/e22/guitarman91/100_0250.jpg
The body with the neck and pickup in place for the photo. I had yet to screw them in. but it gives a good indication on how the finished guitar ended up looking.
http://i36.photobucket.com/albums/e22/guitarman91/100_0253.jpg
The guitar asembled and during the placing of the bridge I discovered that the Schaller bridge I wanted to use didn't fit the posts, so I ended up using a Gotoh wrap around instead. I have yet to wire up the coil tap switch which will be in the vacant hole.
As for how it sounds, it's a rock monster of course, it sounds really harsh and raw.
http://i36.photobucket.com/albums/e22/guitarman91/100_0248.jpg
The body bare
http://i36.photobucket.com/albums/e22/guitarman91/100_0251.jpg
The body in gun stock oil.
http://i36.photobucket.com/albums/e22/guitarman91/100_0250.jpg
The body with the neck and pickup in place for the photo. I had yet to screw them in. but it gives a good indication on how the finished guitar ended up looking.
http://i36.photobucket.com/albums/e22/guitarman91/100_0253.jpg
The guitar asembled and during the placing of the bridge I discovered that the Schaller bridge I wanted to use didn't fit the posts, so I ended up using a Gotoh wrap around instead. I have yet to wire up the coil tap switch which will be in the vacant hole.
As for how it sounds, it's a rock monster of course, it sounds really harsh and raw.