Page 1 of 1
Schematics for 325C58 and 325C64
Posted: Sun Mar 23, 2008 10:20 pm
by Rick325man
I have yet to see schematics for these guitars on the RIC website. Does anyone know if they are available or how one can obtain schematics for these guitars? Thanks!
Re: Schematics for 325C58 and 325C64
Posted: Mon Mar 24, 2008 3:04 am
by glen_l
The schematics for these are virtually identical to standard mono wiring.
A C58 is wired almost the same as a V59, but with the tone pots wired to operate the opposite direction (ala pre-'61 Rics) . All 4 pots in the C58 were 500K linear in the ones I've worked on. Don't ask me why.
Re: Schematics for 325C58 and 325C64
Posted: Mon Mar 24, 2008 11:29 am
by Rick325man
Thanks. By opposite direction of the tone pots, I take it that you mean turning them counterclockwise (when facing the guitar) increases the tone, and turning them clockwise reduces the tone?
Is there a .0047 cap in the treble volume circuit on your C58?
Also, are the pickup values on the C58 the same value for all three pickups? ie. around 5.8-6k?
Thanks again for all of your help!
Re: Schematics for 325C58 and 325C64
Posted: Mon Mar 24, 2008 8:27 pm
by glen_l
Yes, you have it correct regarding the tone pots Ric325man.
Yes there was a 0.0047uf high pass cap in my 325c58's
No the pickups in c58's don't measure 5.8K. I just measured one now and all 3 pickups are close to 3.7K. This is why they are so low gain.
Re: Schematics for 325C58 and 325C64
Posted: Mon Mar 24, 2008 9:40 pm
by Rick325man
Many thanks!