Page 1 of 1
Adjusting Pickups on '07 330
Posted: Sun Sep 07, 2014 10:51 am
by Amber
Can anyone tell me how to adjust these? I see foam between the body and pickup. Can I compress or de-compress the foam by turning screws? if so which ones. Or, do I just move the pole pieces up and down? What distance should the top of the pickup be from the strings and what distance should the poles be?
Many thanks.
Re: Adjusting Pickups on '07 330
Posted: Mon Sep 08, 2014 5:31 pm
by doctorwho
They are adjustable to some degree. Use the "center screw" on each side of the pickup. It's the longer screw that is part # 5203 ("Mounting Screw") in this drawing:
http://www.rickenbacker.com/pdfs/gpickups.pdf
FWIW, when I adjust mine, I give the pickup a little push or pull by hand to help it move down or up (I figure that it will help avoid the screw hole from getting stripped).
Re: Adjusting Pickups on '07 330
Posted: Tue Sep 09, 2014 6:16 pm
by Amber
Many thanks. I'll try that and see how I get on.
Re: Adjusting Pickups on '07 330
Posted: Thu Sep 11, 2014 2:28 pm
by doctorwho
Amber wrote:Many thanks. I'll try that and see how I get on.
Cool. Let us know if we can help you further.
