Page 1 of 1
How to adjust old rod system?
Posted: Fri Feb 16, 2001 3:34 pm
by Rob_Ashford
Sorry if this has been asked before. Based on Mark`s help i have adjusted the rods on newer Ricks, however, a friend of mine would now like me to adjust an underbow on his 1978 4001. As this is the old system i dont want to damage it. Any advice would be welcome. Thanks Rob Ashford.
Posted: Fri Feb 16, 2001 4:41 pm
by markthemd
Rob ,the old system method has been posted under ...how not to adjust the truss rods.Go there first .some how I am having a DeJa Vu on this with you .
If the aluminum bar is chewed up too much and the rods are bent into the cavity ,then repost and I will help you out .
Posted: Fri Feb 16, 2001 4:49 pm
by Rob_Ashford
Sorry Mark, my system sometimes sends blank emails, and therefore im not always sure they get through. Sorry if im a bit of a pain, i dont mean to be! Rob
Posted: Fri Feb 16, 2001 6:13 pm
by markthemd
you are not at all .
so what is the deal? is this the same one?
or same problem new instrument?
or did you forget from the last time around?I know this is not second nature for you .I do this in my sleep ..well sort of .
Posted: Sat Feb 17, 2001 3:31 am
by Rob_Ashford
The last adjustment was for a CW 360 12string. This new request is for a 1978 4001. Because this is not my bass, and it has the old rod system i didnt want to damage it. I have already checked the set up from the thread you posted some time ago and yes i believe the rods need a tweek. You are rght Mark im not very confident with these matters, thats why i appreciate your expert opinion, and craftsmanship with all things Rick. Thanks Rob Ashford.