Stain on neck from stand

gbenner · Post by **gbenner** » Fri Nov 05, 2004 2:37 pm

I picked up a second Ric 4003 in fireglo to go with my mapleglo. I've been using the fireglo and letting the mapleglo sit on a guitar stand. When I picked up the mapleglo after a week or so of sitting on the stand, there was a black stain on the back of the neck from the tubing on the stand. I hope I will be able to get the black stain off the neck. Now my question is do any of you use different material over the black tubing on the stands, to prevent this from happening. Great site, I've only posted hear a few times, but I read it everyday. A LOT of good info. Thanks for any help.

George

jamie · Post by **jamie** » Fri Nov 05, 2004 3:25 pm

I've heard that the tubing on some stands can actually eat the guitars finish and a lot of people put cloth/diapers/towels over the tubing. I never heard of the black tubing actually staining the finish. Hope it comes off with some polish.

jnbass · Post by **jnbass** » Fri Nov 05, 2004 5:54 pm

it may not come out totally.

somewhere there's a thread that deals with this.

doctorwho · Post by **doctorwho** » Fri Nov 05, 2004 8:27 pm

I've had a similar problem with the black leather end of a guitar strap transferring black to adjacent binding when the strap was left attached to the guitar while it was stored in the case. I haven't tried to do anything about it so far except to leave all straps off bound guitars.

ojobob2 · Post by **ojobob2** » Sat Nov 06, 2004 1:20 am

My white 4003 has orange "burns" where it was hanging on a wall hanger. It was like that when i bought it used so i dont even care. But it wont ever come out

cheyenne · Post by **cheyenne** » Sat Nov 06, 2004 2:43 am

Surgical rubber (latex) is OK, stay away from vinyls.

gbenner · Post by **gbenner** » Sat Nov 06, 2004 2:45 am

Jared, there is a thread on this, but I can't find it, it was a while ago. I also thought Paul Yan had some photo's of what he did to his stands in that thread.

lshaia · Post by **lshaia** » Sat Nov 06, 2004 4:09 am

Paul used cloth tennis racquet grip wrap on his stands, hot pink as I recall. My wife has sewn some cotton sleeves which slip over the contact surfaces, seems to work well. Someone else here bought some cheapo leather work gloves and cut the fingers off to use on their wall hanger, which is a great idea.

I had the finish on a Les Paul eaten down to the wood by the tubing on a wall hanger once, I hate when that happens.

bottom4 · Post by **bottom4** » Sat Nov 06, 2004 4:23 am

I use felt similar to that found in guitar cases on my stands. My wife cuts it down to size and then hot glues it to the stands.

thx1955 · Post by **thx1955** » Sat Nov 06, 2004 4:55 am

I use Microfiber dusters folded over, and they go between the wood and the rubber, these cloths are allso great for polishing too, they have almost no abrasiive character at all, and they wick moisture away from the strings after playing.

blueflamerick · Post by **blueflamerick** » Sat Nov 06, 2004 2:15 pm

I cover the contact points of my stands with old (but washed) gym socks.

admin · Post by **admin** » Sun Nov 07, 2004 1:48 am

Some use "Dr. Scholl's" mole skin to wrap the stand.

It has an adhesive backing which does not seem to react with the finish. It is easy to find in grocery or drug stores, at least in the US.

I have not tried this but I am going to check it out.

gbenner · Post by **gbenner** » Sun Nov 07, 2004 4:02 am

I was thinking of using surgical tubing, but the Dr Scholl's sounds like an easy solution. I need to do 4 stands. Thanks Peter.

admin · Post by **admin** » Sun Nov 07, 2004 5:30 am

Here is the link to the product. A strange feat has been accomplished.

cheyenne · Post by **cheyenne** » Sun Nov 07, 2004 4:00 pm

Seems a "shoe-in" to me Peter.