Tonelab Settings for That 60's RIC 12 String Vibe

junglejem · Post by **junglejem** » Sat Apr 29, 2006 3:45 am

My Tonelab just arrived, and I'm using it live this evening (w/330 12) without the benefit of having experimented with all of its capabilities. Anyone have any tips on how to capture the Byrds/Searchers/Harrison tone? Is there a pre-set program that will get it? I have a Jangle Box...should I try a manual setting, and if so, what works for you folks?

And finally, is there sufficient output on the Tonelab (not the SE) to run direct into the P.A. without a stage amp? Can I just go Tonelab to D.I.?

ozover50 · Post by **ozover50** » Sat Apr 29, 2006 10:07 am

Don't know about the Tonelab, Jere - I have an SE. The Janglebox works well for me with the switch in the normal or bright position and both gain and attack around one o'clock. It's a good starting position, anyway.

kenindfw · Post by **kenindfw** » Sat Apr 29, 2006 10:15 am

Well you've certainly given us lots of time to help you out. LOL

You might try this yahoo group:

http://launch.groups.yahoo.com/group/ToneLab/

Check the files section.

I have a Tonelab and use it with my 360/12. I use the AC30 amp model and associated speaker cabinet. Gain = 2.8
VR Gain = 8.9
Treb = 6.1
Mid = 3.7
Bass = 3.5
Ch Vol = 9.0

These are just the settings I use, I must confess I didn't spend a huge amount of time carefully varying each parameter to get the exact sound.

bitzerguy · Post by **bitzerguy** » Sat Apr 29, 2006 10:18 am

The Tonelab will go direct to the PA Jere. Set the output switch on the back to Line (not Amp) and plug it in. No DI box is needed. Set the output volume on the Tonelab to almost full and adjust your PA volume to suit.

Start with the model as AC30 or AC30TB and AC30 cabinet or AD412 cabinet models (what ever is best to your ears). Set the effect model to compressor, or use your Jangle box set up as Howard mentions (but keep the output level low, you could cause the Tonelab input to digitally clip if you go in too hot). I also use the Chorus, but set the speed and depth as low as they can go. This gives a depth to the tone.

I can't give you the exact settings, because mine are set for a 660/12 and my ears, while your 330 will be different. But these should get you in the ballpark.

...Dean

junglejem · Post by **junglejem** » Sat Apr 29, 2006 10:45 am

Very much appreciated, guys. I'll report back after the weekend, let you know what worked. I need to get a good acoustic setting for one or two songs as well, but I think I've found that one. What a cool toy this Tonelab is.

junglejem · Post by **junglejem** » Mon May 01, 2006 3:50 pm

The acoustic simulator seems to work real well with the "Folk" pre-set.

But I'm still not getting it for pure, 60's, jangle & chime. I haven't quite figured out the gain structure, I guess. Still getting too much distortion. Black 2X12 amp & cabinets work fairly well, but I cannot get them clean. Vox AC15 comes pretty close, but I can't get that combo much cleaner. Boutique Clean is the same story. When I listen to Les Fradkin's CDs (he claims to record w/Tonelab and Jangle Box) I'm not even close to that sound. Keep working on it I suppose.