4001 route dimensions needed

ricosound · Post by **ricosound** » Mon May 14, 2007 5:03 am

Does anyone have the bridge routing dimensions, length x width x depth + mute channel width x depth for a '77 4001. I'm trying to restore the factory bridge where somebody filled it in. Any help would be appreciated

rickcrazy · Post by **rickcrazy** » Mon May 14, 2007 11:19 am

Okay, Wes. Straight from my 1979 4080 which will be leaving me very soon: the main bridge route is a trapezoid with rounded corners. It is 1 3/4" wide and 1/4" deep except where it accommodates the mute: 1/2" deep. The "shorter" side is roughly 3", and the "longer" side is roughly 3 1/4". Bear in mind that both sides would be slightly longer if the trapezoid had sharp corners. As for the mute channel, it is 3 3/4" long and 3/4" wide, with rounded ends. I hope this helps.

wints · Post by **wints** » Mon May 14, 2007 11:31 am

I know that messed up bridge feeling...

rickcrazy · Post by **rickcrazy** » Mon May 14, 2007 12:37 pm

Will that 4001 ever return to its former glory?

wints · Post by **wints** » Mon May 14, 2007 1:55 pm

It will Sergio, it will...

johnallg · Post by **johnallg** » Mon May 14, 2007 2:37 pm

Wints, what were they thinking?! What bridge was that routed for?

jingle_jangle · Post by **jingle_jangle** » Mon May 14, 2007 2:43 pm

Looks more like it was routed for an ashtray.

No, a real ashtray...

wints · Post by **wints** » Mon May 14, 2007 2:45 pm

John,

It's original one!

That's the 70's version of how to lower the action!

1. Rout body an 1/8th" give or take a fraction.
2. Cut holes in your pick up surround to let in the new low action!

Oh, for a truss rod tool and this forum 30 years ago!

johnallg · Post by **johnallg** » Mon May 14, 2007 2:54 pm

Wow... 'course musicians and setup knowledge back then were not generally known to each other...

ricosound · Post by **ricosound** » Thu May 17, 2007 9:26 am

Thanks Sergio. You know you could have just sent me the 4080 for a while and saved the hassle of measuring! (insert one of those happy faces here)

rickcrazy · Post by **rickcrazy** » Thu May 17, 2007 11:45 am

Here it is: