More "clank" !

[jwr2]

Remember that only '90 up high gains can be unbuttoned. Also, be sure to use the pickup with the wider spacing between the end poles in the bridge position.

Yes I tried it on 80s high gains and it destroys the pickup

[VRICKY63]

Think I'll send some 82 guitar high gains to ebay . Some things on this forum are too serious to joke about.......no , the V63 is not really being routed for P bass pickups

[qwezirider]

I got it. I think you should go for the P routing.

[VRICKY63]

OK Bruce , Im doing it !

[qwezirider]

Be sure to free hand it with a Dremel. You can do that!

[aceonbass]

I think best results could be had with a coal chissel and a five pound sledge hammer.

[jwr2]

Think I'll send some 82 guitar high gains to ebay . Some things on this forum are too serious to joke about.......no , the V63 is not really being routed for P bass pickups

Put in emgs a preamp and route it out for a batterbox

hehehehe

[pacealot]

Why not just chew through the thing? Sharpen up those incisors.

[VRICKY63]

I just rented a tree branch shredder .......pretty Fireglo chips !!!!!!! Damn horseshoe jammed the machine

[aceonbass]

Now we KNOW you're kidding Rick

[VRICKY63]

I did not have a coal chissel handy ! LOL ! That was fun

[qwezirider]

One word:





Poulan.

[qwezirider]

Bruce, if ya wanna put single coils in your 4004, get a pair of new BRIDGE high gains for a guitar.

Dane, what is the effect of using two bridge pickups versus one bridge and one neck? I'm now leaning this route rather than route the bass or destroy the pickups.

[aceonbass]

Bruce, the bridge pickups for guitar have a slightly wider spacing between the two end poles than the neck pickups. With the wider spacing of the 4004, you'd want the pickups with the biggest spread, especially with a 4-2-5 conversion.

[qwezirider]

Got it. Not so much a sonic issue as it is space.