Polishing Mystery
Moderator: jingle_jangle
- deaconblues
- RRF Consultant
- Posts: 2390
- Joined: Tue Feb 06, 2007 5:14 pm
Polishing Mystery
Hey there Paul,
I finally got around to giving my 325 its first good Scratch-X/Zymol treatment last night, and the finish has never looked so shiny and deep. However, I noticed afterward that my cloths were covered in black smudges. Would it be possible for some of the finish to come off during polishing, or is that just dirt? Anything to worry about? Thanks.
I finally got around to giving my 325 its first good Scratch-X/Zymol treatment last night, and the finish has never looked so shiny and deep. However, I noticed afterward that my cloths were covered in black smudges. Would it be possible for some of the finish to come off during polishing, or is that just dirt? Anything to worry about? Thanks.
- jingle_jangle
- RRF Moderator
- Posts: 22679
- Joined: Wed Dec 22, 2004 6:00 am
- Contact:
Re: Polishing Mystery
Dan, It's very unlikely that you've got paint on the cloths. Much more likely that it's from the frets or simply dirt.
- deaconblues
- RRF Consultant
- Posts: 2390
- Joined: Tue Feb 06, 2007 5:14 pm
Re: Polishing Mystery
Thanks, Paul. I figured it was unlikely to be the finish, but I wasn't 100%. It sure looked like it, though!
- jingle_jangle
- RRF Moderator
- Posts: 22679
- Joined: Wed Dec 22, 2004 6:00 am
- Contact:
Re: Polishing Mystery
JG is a very thin finish, the CV is 10X thicker in most places. The factory doesn't buff through the CV. Scratch-X is a very mild abrasive, though I suppose that with a lot of pressure on edges, where paint and CV is thinnest, it could cut through the CV into the JG color coat. Anyway, should you in subsequent polishings, cut into bare maple, it would be time for a CV touch-up.
To check this, you can put a bit of Scratch-X on a soft cotton cloth and work it into the weave. now, stroke along the suspect edge area, rubbing lightly. If you see the smudges (and they'll be streaks, since you're rubbing along the edge!), then stop. You've rubbed through in that area. 99% of the time, it's edges that rub through.
If you don't get smudges, it was something else staining the cloth. In Aitch's case, it would be chicken grease.
This method can be used for any color, not just CV.
Fix for rub-throughs is nothing less than a CV touchup. In the case of JG, best to re-CV the whole instrument.
To check this, you can put a bit of Scratch-X on a soft cotton cloth and work it into the weave. now, stroke along the suspect edge area, rubbing lightly. If you see the smudges (and they'll be streaks, since you're rubbing along the edge!), then stop. You've rubbed through in that area. 99% of the time, it's edges that rub through.
If you don't get smudges, it was something else staining the cloth. In Aitch's case, it would be chicken grease.
This method can be used for any color, not just CV.
Fix for rub-throughs is nothing less than a CV touchup. In the case of JG, best to re-CV the whole instrument.
Re: Polishing Mystery
jingle_jangle wrote:
If you don't get smudges, it was something else staining the cloth. In Aitch's case, it would be chicken grease.
All I wanna do is rock!
Re: Polishing Mystery
Fretboards are usually dirtier then you realize... 
Re: Polishing Mystery
Haven't had roast chicken within 30 feet of any of my Ricks since that episode, Paul!!If you don't get smudges, it was something else staining the cloth. In Aitch's case, it would be chicken grease.
"Never eat more than you can lift." - Mr. Moon
Re: Polishing Mystery
Oh this sounds like a great story Aitch................ozover50 wrote:Haven't had roast chicken within 30 feet of any of my Ricks since that episode, Paul!!If you don't get smudges, it was something else staining the cloth. In Aitch's case, it would be chicken grease.
“We can't solve problems by using the same kind of thinking we used when we created them.” - Albert Einstein
"You do not really understand something unless you can explain it to your grandmother" - Albert Einstein
"You do not really understand something unless you can explain it to your grandmother" - Albert Einstein
- beatlefreak
- Senior Member
- Posts: 6160
- Joined: Wed Jun 14, 2006 5:45 am
- Contact:
