Jazzmaster Bridge solution?
Moderator: jingle_jangle
Jazzmaster Bridge solution?
I know many put buzzstops and Mustang bridges on their Jazzmasters but I gave this bridge a try. It wasn't expensive.The posts themselves don't fit firmly into the holes, and the metal thimbles had to be removed to make it fit. When in tune though, the bridge doesn't move at all. I'll know if it's a blessing or a curse after the weekend when my son plays the heck out of it.
Last edited by marc61 on Wed Sep 16, 2009 8:35 pm, edited 1 time in total.
- sloop_john_b
- Rick-a-holic
- Posts: 13843
- Joined: Tue Jan 25, 2005 6:00 am
Re: Jazzmaster Bridge solution?
Wow! That is very similar to a Mosrite bridge. What is it?
Re: Jazzmaster Bridge solution?
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... K:MEWNX:IT
- jingle_jangle
- RRF Moderator
- Posts: 22679
- Joined: Wed Dec 22, 2004 6:00 am
- Contact:
Re: Jazzmaster Bridge solution?
I'm amazed that the posts and string centers are the same dimensions!
Anyway, a stock Jazzmaster/Jaguar bridge can be fixed in about 5 minutes or less, so the strings will never slip again. Just takes a smallish triangular file and a magic marker to mark the string locations on the threaded sections...
Anyway, a stock Jazzmaster/Jaguar bridge can be fixed in about 5 minutes or less, so the strings will never slip again. Just takes a smallish triangular file and a magic marker to mark the string locations on the threaded sections...
- antipodean
- Senior Member
- Posts: 3182
- Joined: Wed Jan 09, 2008 1:27 am
Re: Jazzmaster Bridge solution?
Or use a Mustang Bridge!jingle_jangle wrote:I'm amazed that the posts and string centers are the same dimensions!
Anyway, a stock Jazzmaster/Jaguar bridge can be fixed in about 5 minutes or less, so the strings will never slip again. Just takes a smallish triangular file and a magic marker to mark the string locations on the threaded sections...
"I don't want to sound incredulous but I can't believe it" Rex Mossop
Re: Jazzmaster Bridge solution?
I started to do that Paul but, was a little nervous that besides deepening the correct groove, I was also flattening the others. If my son doesn't like the bridge(the saddles definitely sit higher), I may work on that again.
- sloop_john_b
- Rick-a-holic
- Posts: 13843
- Joined: Tue Jan 25, 2005 6:00 am
Re: Jazzmaster Bridge solution?
Nah, doesn't work for me. The E strings still slip out really easily.antipodean wrote: Or use a Mustang Bridge!
- paologregorio
- Senior Member
- Posts: 6376
- Joined: Wed Aug 08, 2007 12:56 pm
- Contact:
Re: Jazzmaster Bridge solution?
The Buzz Stop worked for me, but I was never happy with the guitar, so I sold it back to its previous owner, who was happy to get it back in its improved condition. 
My Bigsby Tele has single slot the Mustang bridge saddles, which work quite nicely. The bridge plate for Bigsby Telecasters is set up for the JM/Mustang bridge.
Good luck with that bridge Mark; it looks like it's a well-engineered piece that will work nicely with the Jazzmaster.
My Bigsby Tele has single slot the Mustang bridge saddles, which work quite nicely. The bridge plate for Bigsby Telecasters is set up for the JM/Mustang bridge.
Good luck with that bridge Mark; it looks like it's a well-engineered piece that will work nicely with the Jazzmaster.
- kennyhowes
- Veteran RRF member
- Posts: 5025
- Joined: Sat Jan 27, 2001 1:03 am
- Contact:
Re: Jazzmaster Bridge solution?
+1 on the BuzzStop. No mods, and makes the most sense.
- sloop_john_b
- Rick-a-holic
- Posts: 13843
- Joined: Tue Jan 25, 2005 6:00 am
Re: Jazzmaster Bridge solution?
I do a lot of behind the bridge picking and the Buzzstop is going to basically kill those notes. Not really an option here.
Re: Jazzmaster Bridge solution?
sloop_john_b wrote:I do a lot of behind the bridge picking and the Buzzstop is going to basically kill those notes. Not really an option here.
weee-heeeell......Captain Avant Garde has to play behind the bridge. oooh.
Re: Jazzmaster Bridge solution?
It's official. My kid loves the Mosrite style bridge. Just keep in mind that the action especially near the pickups is higher. It does eliminate buzzing, and saddle rattling. While he likes it, I do not recommend for all.
- jingle_jangle
- RRF Moderator
- Posts: 22679
- Joined: Wed Dec 22, 2004 6:00 am
- Contact:
Re: Jazzmaster Bridge solution?
You can correct the action situation by slightly shimming the neck pocket at the body end.
