Detached Case Straps
Moderator: jingle_jangle
Detached Case Straps
I have a standard 360 case, maybe 10 years old, in which each of the lid retainer straps has come unglued on one end. Any suggestions for reattaching them, without drilling holes or tearing things apart too badly? Thanks, either way!
Re: Detached Case Straps
I did this with a case for one of my basses. I just put contact cement on the end of the strap and with a putty knife to slightly push the foam away from the case I shoved the strap back in. While I did this I put the straps in a location that allowed the lid to lean back more than they usually do, ensuring it won't do the usual automatic closing thing while trying to remove or replace the bass in the case.
Why can't SKB do this in the first place? 
-
blueflamerick
- Advanced Member
- Posts: 1943
- Joined: Wed Apr 30, 2003 1:43 pm
- Contact:
Re: Detached Case Straps
A big baby diaper safety pin worked for me.
- beatlefreak
- Senior Member
- Posts: 6160
- Joined: Wed Jun 14, 2006 5:45 am
- Contact:
Re: Detached Case Straps
They've got you to do it!jps wrote:Why can't SKB do this in the first place?
Ka is a wheel.
Re: Detached Case Straps
I know that there is at least one previous thread on this, but I will repeat my recommendation here.
I use superglue and a plastic disposable knife to push in the strap to where it belongs (after first figuring that out, of course). If one works quickly, this is an easy, fast fix. Plus, it'll be obvious if the repair didn't take, as the strap will not stay in if it's not glued to something.
BTW, I always wear latex or nitrile gloves when doing this, for obvious reasons!
I use superglue and a plastic disposable knife to push in the strap to where it belongs (after first figuring that out, of course). If one works quickly, this is an easy, fast fix. Plus, it'll be obvious if the repair didn't take, as the strap will not stay in if it's not glued to something.
BTW, I always wear latex or nitrile gloves when doing this, for obvious reasons!
It is better, of course, to know useless things than to know nothing. - Seneca
Re: Detached Case Straps
Here's a bit of advice from an earlier thread on this subject:
viewtopic.php?f=3&t=386206&p=501981&hil ... ps#p501981
viewtopic.php?f=3&t=386206&p=501981&hil ... ps#p501981
Re: Detached Case Straps
Thanks, everyone.
Just curious--anyone know what kind of glue the manufacturer uses on these?
Just curious--anyone know what kind of glue the manufacturer uses on these?
Re: Detached Case Straps
Not sure, but the residues I have seen on straps that have pulled out appear to be some sort of hot-melt adhesive.RutleDirk wrote:Thanks, everyone.
Just curious--anyone know what kind of glue the manufacturer uses on these?
It is better, of course, to know useless things than to know nothing. - Seneca
Re: Detached Case Straps
No wonder they pull out.doctorwho wrote:Not sure, but the residues I have seen on straps that have pulled out appear to be some sort of hot-melt adhesive.RutleDirk wrote:Thanks, everyone.
Just curious--anyone know what kind of glue the manufacturer uses on these?
